1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the Supermicro CSE-827HD-R1400B 1400W 2U Rackmount Server Chassis. This high-performance chassis is designed to house server components, offering robust power delivery and efficient cooling for demanding applications. Please read this manual thoroughly before proceeding with installation or operation.
2. 안전 정보
부상과 장비 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 설치 또는 유지보수 작업을 수행하기 전에 반드시 전원 공급 장치를 차단하십시오.
- Wear anti-static wrist straps when handling internal components to prevent electrostatic discharge (ESD).
- Do not operate the chassis with the cover removed unless specifically instructed for troubleshooting.
- 모든 전기 연결에 대해 적절한 접지가 이루어졌는지 확인하세요.
- This chassis is heavy. Use appropriate lifting techniques or assistance when moving or installing it in a rack.
- 과열을 방지하기 위해 섀시 주변에 적절한 환기를 유지하십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Supermicro CSE-827HD-R1400B 2U Rackmount Server Chassis
- 1400W High-Efficiency (1+1) Redundant Power Supply (pre-installed)
- 4x 80mm PWM Cooling Fans (pre-installed)
- Rack mounting rails (if included with your specific purchase)
- Accessory kit (screws, cables, standoffs)
- 빠른 설치 가이드(이 문서)
그림 3.1: Supermicro CSE-827HD-R1400B 2U Rackmount Server Chassis. This image shows the front view of the server chassis, highlighting its rackmount design and general appearance.
4. 설정 및 설치
Follow these steps for proper installation of the server chassis and its components.
4.1. 랙 마운팅
- Attach the provided rack rails to the server chassis sides using the designated screws.
- Mount the other end of the rack rails to the server rack posts, ensuring they are securely fastened.
- Slide the chassis into the rack until it locks into place.
4.2. 마더보드 설치
The chassis supports ATX motherboards.
- Remove the chassis top cover by unscrewing the retaining screws.
- Install the I/O shield into the chassis rear panel.
- Align the motherboard with the standoffs inside the chassis.
- 적절한 나사를 사용하여 마더보드를 고정하십시오.
4.3. 하드 드라이브 설치
The chassis supports 3.5-inch hard drives.
- Locate the drive bays.
- Mount each 3.5-inch hard drive into a drive tray.
- Slide the drive tray with the installed hard drive into the designated bay until it clicks into place.
- Connect the SATA/SAS data and power cables to each hard drive.
4.4. 전원 연결
- Connect the main 24-pin ATX power connector from the power supply to the motherboard.
- 8핀(또는 4핀) CPU 전원 커넥터를 마더보드에 연결합니다.
- Ensure all peripheral power connectors (e.g., for GPUs, additional fans) are properly connected.
- Connect the AC power cords from the redundant power supplies to separate, grounded power outlets.
5. 사용 설명서
5.1. 전원 켜기 / 끄기
- 전원 켜기: After all connections are secure, press the power button on the front panel. The power LED should illuminate.
- 정상 종료: Perform a graceful shutdown through the operating system.
- 강제 종료: Press and hold the power button for 5-7 seconds. Use only when necessary to prevent data loss.
5.2. LED 표시기
Refer to your motherboard manual for specific LED indicator meanings. Common indicators on the chassis front panel include:
- 전원 LED: Indicates system power status (On/Off/Standby).
- HDD 작동 LED: Flashes when hard drives are being accessed.
- Network Activity LED: Indicates network traffic (if integrated on the front panel).
6. 유지관리
Regular maintenance ensures optimal performance and longevity of your server chassis.
- 먼지 제거: Periodically clean dust from the chassis interior, especially fan blades and heatsinks, using compressed air. Ensure the system is powered off and unplugged before cleaning.
- 팬 검사: Check cooling fans for proper operation and excessive noise. Replace any failing fans promptly.
- 케이블 관리 : Ensure internal cables are neatly routed to avoid obstructing airflow.
7. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 시스템 전원이 켜지지 않습니다. | Power cables disconnected, faulty power supply, faulty power button. | Check all power connections. Verify power supply status LEDs. Test power button functionality. |
| 선풍기 소음이 지나치게 크다. | Dust accumulation, failing fan bearing. | Clean fans. Replace noisy or failing fans. |
| 시스템 과열. | Poor airflow, fan failure, dust buildup. | Ensure proper ventilation. Check fan operation. Clean dust from components. |
| Hard drives not detected. | Loose data/power cables, incorrect BIOS settings, faulty drive. | Verify all data and power cables are securely connected. Check BIOS/UEFI settings. Test drives in another system if possible. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 슈퍼마이크로 |
| 모델명 | CSE-827HD-R1400B |
| 폼 팩터 | 2U 랙마운트 |
| 마더보드 호환성 | 에이티엑스 |
| 전원 공급 장치 | 1400W High-Efficiency (1+1) Redundant, 80 PLUS Gold Certified |
| 냉각 팬 | 4x 80mm PWM |
| 하드 디스크 폼 팩터 | 3.5 인치 |
| 색상 | 검은색 |
| 품목 무게 | 68 파운드 |
| 제품 크기(D x W x H) | 28.5인치 깊이 x 28.5인치 너비 x 28.5인치 높이 |
| 한국어: | 672042062768 |
| ASIN | B005KFBPBS |
9. 보증 및 지원
For warranty information, please refer to the documentation provided with your purchase or visit the official Supermicro website. For technical support, product inquiries, or to report issues, please contact Supermicro customer service through their official channels.
온라인 지원: www.supermicro.com/support
연락처 정보: 슈퍼마이크로 참조 web지역별 연락처 정보는 사이트를 참조하세요.
