Tuttnauer 2340M Manual Autoclave User Manual

1. 서론

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of the Tuttnauer 2340M Manual Autoclave. Please read this manual thoroughly before operating the device.

The Tuttnauer 2340M Autoclave is designed for sterilization applications in healthcare and laboratory facilities. It offers a reliable method for sterilizing instruments and materials without compromising safety or operational integrity.

그림 1: 앞쪽 view of the Tuttnauer 2340M Manual Autoclave, showing the control panel and door handle.

2. 안전 정보

Adherence to the following safety guidelines is crucial for preventing injury and damage to the autoclave:

• Always ensure the autoclave is properly grounded.
• Do not open the door while the chamber is pressurized. The double safety locking device prevents this, but always verify.
• Use only distilled or deionized water to prevent mineral buildup and ensure proper operation.
• 뜨거운 물건이나 표면을 다룰 때는 내열 장갑과 같은 적절한 개인 보호 장비(PPE)를 착용하십시오.
• 장치 주변에 적절한 환기가 이루어지도록 하세요.
• Regularly inspect the door gasket and chamber for any signs of wear or damage.
• The unit is equipped with a dual safety thermostat to protect against overheating. Do not bypass or tamp안전 기능이 있어요.

3. 주요 특징

The Tuttnauer 2340M Autoclave incorporates several design elements for efficient and safe sterilization:

• 자동 종료: Features an automatic shut-off at the end of both sterilization and dry cycles.
• Durable Chamber: Equipped with a long-life electro-polished chamber and door for enhanced longevity.
• Safety Locking Device: 이중 안전 잠금 장치는 챔버에 압력이 가해지는 동안 문이 열리는 것을 방지합니다.
• Front Drain Valve: The drain valve is conveniently located on the front for quick and easy draining of the water reservoir.
• 과열 보호: Includes a dual safety thermostat to protect against overheating.

4. 설정 및 설치

4.1 풀기

Carefully remove the autoclave from its packaging. Inspect the unit for any visible damage that may have occurred during transit. Retain all packaging materials for future transport or service needs.

4.2 배치

Place the autoclave on a stable, level surface capable of supporting its weight (approximately 81 pounds). Ensure there is adequate clearance around the unit for ventilation and access for maintenance. Avoid placing the unit near heat sources or in direct sunlight.

4.3 전원 연결

Connect the power cord to a grounded electrical outlet that meets the specifications outlined in the "Specifications" section of this manual.

4.4 물 저장고 채우기

Open the door and locate the water reservoir fill port. Fill the reservoir with distilled or deionized water up to the indicated fill line. Never use tap water, as mineral deposits can damage the unit.

그림 2: 옆 view of the autoclave, illustrating the robust door mechanism and handle.

5. 사용 설명서

5.1 제어판 이상view

The control panel features a pressure gauge, timer knob, temperature selector, and indicator lights for power, heat, and dry cycles.

그림 3: 상세한 view of the control panel, highlighting the timer, temperature, and cycle indicator controls.

5.2 Loading the Autoclave

Arrange items to be sterilized in the chamber, ensuring proper spacing for steam circulation. Use appropriate sterilization pouches or wraps. Do not overload the chamber.

그림 4: Interior of the autoclave chamber, showing the arrangement of sterilization trays.

5.3 Sterilization Cycle

1. Close and secure the door firmly using the door handle. Ensure the "ENSURE DOOR TIGHTNESS" indicator is satisfied.
2. Turn the main power switch to "ON". The POWER indicator light will illuminate.
3. Select the desired sterilization temperature using the "Temp." knob (e.g., 250°F/121°C or 273°F/134°C).
4. Set the sterilization time using the "Timer" knob according to the material being sterilized and recommended guidelines.
5. The HEAT indicator light will illuminate as the chamber begins to heat and build pressure. Monitor the pressure gauge.
6. Once the set temperature and pressure are reached, the timer will begin counting down.
7. Upon completion of the sterilization cycle, the unit will automatically shut off, and the DRY indicator light may illuminate if a dry cycle is selected.

5.4 Drying Cycle (if applicable)

If a drying cycle is required, ensure the appropriate setting is selected on the control panel. The DRY indicator light will signal this phase. Allow the cycle to complete fully before opening the door.

5.5 하역

After the cycle is complete and the pressure gauge reads zero, carefully open the door. Use heat-resistant gloves to remove sterilized items, as they will be hot.

6. 유지관리

Regular maintenance ensures the longevity and optimal performance of your Tuttnauer 2340M Autoclave.

6.1 일일 유지 보수

• 광고로 외부 표면을 닦아냅니다.amp 옷감.
• Check the water level in the reservoir and refill with distilled water as needed.

6.2 주간 유지 관리

• Clean the chamber interior and trays with a non-abrasive cleaner designed for autoclaves.
• Inspect the door gasket for cracks, tears, or hardening. Replace if necessary.
• Drain and refill the water reservoir completely to prevent buildup, especially if the unit is not used daily. The front drain valve facilitates this process.

6.3 연간 유지 보수

• It is recommended to have the autoclave inspected and serviced by a qualified technician annually.
• Calibration of the pressure gauge and temperature sensors may be required.

7. 문제 해결

This section addresses common issues that may arise during the operation of the Tuttnauer 2340M Autoclave.

For issues not listed here or if solutions do not resolve the problem, contact Tuttnauer customer support or a qualified service technician.

8. 사양

Key technical specifications for the Tuttnauer 2340M Manual Autoclave:

• 모델: 2340M
• 제조업체: Tuttnauer
• 제품 크기: 25 x 35 x 30 인치
• 무게: 81 파운드
• Chamber Type: 전해 연마
• 안전 기능: Double safety locking device, Dual safety thermostat
• 물 필요량: Distilled or Deionized Water only

9. 반품 정책

This product is subject to the following return policy:

• A 7-day return and exchange policy applies to all orders.
• Returns and exchanges are accepted only if the item is brand new (unused) and in an unopened box.
• 구매자는 반품 배송 비용을 책임집니다.
• A 15% restocking fee will apply to all autoclaves and small equipment returns.

For detailed information, please refer to the purchase agreement or contact your supplier.

10. 고객 지원

For technical assistance, service, or inquiries regarding your Tuttnauer 2340M Autoclave, please contact Tuttnauer customer support or your authorized distributor.

You can find more information and contact details on the official Tuttnauer web대지: www.tuttnauer.com