Supermicro X9SCL-B Server Motherboard User Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the Supermicro X9SCL-B server motherboard. The X9SCL-B is a Micro ATX form factor motherboard designed for server applications, supporting 2nd generation Intel Core i3, Intel Xeon E3-1200, and Pentium series processors with an LGA1155 socket and Intel C202 PCH chipset. It features four DDR3 DIMM slots for up to 32GB ECC unbuffered memory, multiple PCI-Express 2.0 x8 slots, and six SATA2 ports with RAID support.

Figure 1: Supermicro X9SCL-B Server Motherboard. This image displays the overall layout of the motherboard, including the CPU socket, memory slots, and various expansion and connectivity ports.

2. 설정 및 설치

Before beginning installation, ensure your workspace is static-free. Refer to the following steps for proper component installation.

2.1 CPU 설치

1. 메인보드에서 LGA1155 CPU 소켓을 찾으세요.
2. CPU 소켓 레버와 보호 덮개를 엽니다.
3. Carefully align the CPU (Intel Core i3, Xeon E3-1200, or Pentium series) with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket.
4. CPU를 억지로 끼우지 말고 조심스럽게 소켓에 넣으세요.
5. 소켓 레버를 닫아 CPU를 고정합니다.
6. Apply thermal paste and install the CPU cooler according to the cooler manufacturer's instructions.

2.2 메모리 설치

The X9SCL-B supports up to 32GB of ECC Unbuffered DDR3-1333/1066 DIMMs across four 240-pin slots. For optimal performance, install memory modules in pairs for dual-channel operation.

1. DIMM 슬롯의 양쪽 끝에 있는 클립을 엽니다.
2. 메모리 모듈을 슬롯에 맞춰서 모듈의 홈이 슬롯의 키와 일치하는지 확인합니다.
3. 클립이 제자리에 고정될 때까지 모듈의 양쪽 끝을 단단히 누릅니다.

2.3 확장 카드 설치

The motherboard features three PCI-Express 2.0 x8 slots (one operating at x4 speed).

1. 사용 가능한 PCI-Express 슬롯을 선택하십시오.
2. 섀시에서 해당 확장 슬롯 덮개를 제거하십시오.
3. 확장 카드를 슬롯에 맞춰 끼우고 완전히 장착될 때까지 세게 누르십시오.
4. Secure the card with a screw or retention clip from your chassis.

2.4 저장 장치 연결

Connect SATA storage devices to the six SATA2 ports on the motherboard.

• SATA 데이터 케이블의 한쪽 끝을 마더보드의 SATA 포트에 연결합니다.
• SATA 데이터 케이블의 다른 쪽 끝을 하드 드라이브 또는 SSD에 연결하십시오.
• 전원 공급 장치에서 저장 장치로 SATA 전원 케이블을 연결하십시오.

2.5 전원 공급 장치 연결

Connect the main 24-pin ATX power connector and the 8-pin (or 4-pin) CPU power connector from your power supply to the corresponding ports on the motherboard. Ensure all power connections are secure.

2.6 주변 장치 연결

주변기기를 해당 포트에 연결하십시오.

• USB 장치: Use the 9 USB 2.0 ports (2 rear, 6 via headers, 1 Type A).
• PS/2 Devices: Connect PS/2 keyboard and mouse to the 2 PS/2 ports.
• Serial Devices: Use the 2 serial ports (1 rear, 1 via header).
• 표시하다: VGA 포트에 모니터를 연결합니다.
• 회로망: Connect Ethernet cables to the 2 RJ45 LAN ports.

3. 사용 설명서

3.1 초기 전원 켜기

1. 모든 구성 요소를 설치하고 연결한 후에는 전원 공급 장치가 켜져 있는지 확인하십시오.
2. 본체의 전원 버튼을 누르세요.
3. The system should power on, and the BIOS POST (Power-On Self-Test) screen will appear on the connected display.

3.2 BIOS/UEFI 설정

BIOS/UEFI 설정 유틸리티에 접근하려면 지정된 키(일반적으로)를 누르십시오. 델 or F2) during the POST sequence. Within the BIOS, you can configure boot order, system settings, and hardware parameters.

3.3 운영 체제 설치

Once the BIOS is configured, you can proceed with installing your preferred operating system (e.g., Windows Server, Linux distributions). Boot from your installation media (USB drive or optical disc) and follow the on-screen instructions.

3.4 RAID 구성

The Intel C202 PCH chipset supports RAID 0, 1, 5, and 10 configurations for the SATA2 ports. Refer to the Intel RAID controller documentation for detailed instructions on setting up RAID arrays. This typically involves accessing a RAID configuration utility during system boot-up.

4. 유지관리

4.1 시스템 청소

Regularly clean the interior of your server chassis to prevent dust buildup, which can lead to overheating and component failure. Use compressed air to remove dust from fans, heatsinks, and motherboard components. Ensure the system is powered off and unplugged before cleaning.

4.2 BIOS 및 드라이버 업데이트

슈퍼마이크로를 주기적으로 점검하세요 website for updated BIOS versions and device drivers. Keeping your BIOS and drivers up-to-date can improve system stability, performance, and compatibility. Follow the instructions provided by Supermicro for any update procedures.

4.3 환경 고려 사항

Ensure the server operates in a well-ventilated environment with appropriate temperature and humidity levels to prolong component lifespan.

5. 문제 해결

If you encounter issues with your Supermicro X9SCL-B motherboard, consider the following troubleshooting steps:

• 전원 없음:
  • Verify that the power supply is connected correctly to the motherboard (24-pin ATX and 8-pin/4-pin CPU power).
  • Ensure the power supply switch is in the ON position and the power cable is securely plugged into a working outlet.
  • 전면 패널 전원 버튼과 마더보드의 연결 상태를 확인하십시오.
• 디스플레이 없음:
  • Confirm the monitor is connected to the motherboard's VGA port and is powered on.
  • Reseat the memory modules. Incorrectly seated RAM is a common cause of no display.
  • If using a discrete graphics card, ensure it is properly seated and connected to power (if required).
  • 메모리 모듈을 하나만 설치한 상태로 부팅해 보세요.
• POST Errors / Beep Codes:
  • Listen for beep codes from the system speaker. Different beep patterns indicate specific hardware issues (e.g., memory, CPU, graphics). Refer to the Supermicro documentation for a list of beep codes.
  • Check for any error messages displayed on the screen during POST.
• 시스템 불안정/충돌:
  • 모든 운전자가 최신 정보를 갖추고 있는지 확인하세요.
  • Check CPU and system temperatures to rule out overheating.
  • 메모리 진단 도구를 실행하여 RAM에 오류가 있는지 확인하십시오.
  • Verify that the power supply provides sufficient and stable power to all components.
• CMOS 지우기:
  • If the system fails to boot after BIOS changes, clear the CMOS by either removing the CMOS battery for a few minutes (with the system unplugged) or using the designated CMOS clear jumper on the motherboard (refer to the motherboard diagram).

6. 기술 사양

7. 보증 정보

Specific warranty terms and conditions for the Supermicro X9SCL-B motherboard are provided by Supermicro or your point of purchase. Please refer to the documentation included with your product or visit the official Supermicro web자세한 보증 정보는 해당 사이트를 참조하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

8. 기술 지원

For technical assistance, driver downloads, or further product information regarding the Supermicro X9SCL-B motherboard, please visit the official Supermicro support website. You may also contact your reseller or system integrator for support.

• 슈퍼마이크로 공식 Web대지: www.슈퍼마이크로.com
• 지원 리소스: Check the support section of the Supermicro website for FAQs, knowledge base articles, and contact options.