dbx 223xs Stereo 2-Way, Mono 3-Way Crossover Instruction Manual

1. 제품 오버view

The dbx 223xs crossover is designed to optimize audio performance by precisely separating frequency bands. It utilizes precision filters to direct correct frequencies to specific loudspeaker drivers, allowing amplifiers to operate more efficiently with usable signals, thereby reducing distortion and enhancing sound clarity for PA systems. This dual-channel crossover offers professional-grade features including Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, a 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Its robust design incorporates solid controls and high-quality XLR inputs and outputs.

2. 주요 특징

• XLR balanced inputs and outputs for professional connectivity.
• Mode switch for flexible stereo 2-way or mono 3-way operation.
• Low frequency summed (subwoofer) output for enhanced bass management.
• x10 range switch on both channels for extended frequency control.
• 40Hz high pass (low cut) filter on both channels to remove unwanted low-end rumble.

3. 패키지 내용

• dbx 223xs Crossover Unit
• 빠른 시작 가이드

4. 제어 및 연결

4.1 전면 패널

The front panel of the dbx 223xs features controls for each channel, including input gain, 40Hz low cut filter, crossover frequency, and individual output gains for low and high frequencies. A mode switch allows selection between Stereo 2-Way and Mono 3-Way operation. The Subwoofer section includes its own crossover frequency and gain controls.

Image: Front panel of the dbx 223xs crossover, showing all control knobs and switches for Channel 1, Subwoofer, Mode, and Channel 2.

Image: Close-up of the crossover frequency knob and associated switches on the dbx 223xs, highlighting the frequency selection and x10 range switch.

4.2 후면 패널

The rear panel provides all audio input and output connections. It features balanced XLR inputs for Channel 1 and Channel 2, and balanced XLR outputs for Low, Mid (in 3-way mode), and High frequencies for each channel, as well as a dedicated Subwoofer output.

Image: Rear panel of the dbx 223xs crossover, displaying XLR input and output connectors for both channels, mode switches, and power input.

5. 설정

The dbx 223xs crossover can be configured for Stereo 2-Way or Mono 3-Way operation. Proper setup ensures optimal sound distribution to your speakers and subwoofers, enhancing clarity and preventing distortion.

5.1 General Setup Principles

• 신호 흐름: Connect your audio source (e.g., mixer) to the inputs of the 223xs.
• 출력 연결 : Connect the outputs of the 223xs to your respective amplifiers for low, mid (if applicable), and high frequency speakers.
• 전원 켜기 순서: Always power on your audio source first, then the 223xs, and finally your amplifiers. When powering off, reverse this sequence.

5.2 Stereo 2-Way Crossover Setup

In Stereo 2-Way mode, the crossover splits the stereo input signal into two frequency bands (low and high) for each channel. This is ideal for systems with main speakers and subwoofers.

1. Connect the stereo outputs of your mixer to the 채널 1 입력 그리고 채널 2 입력 on the rear panel of the dbx 223xs using balanced XLR cables.
2. 설정하다 방법 전면 패널의 스위치를 켜세요 스테레오 2웨이.
3. 연결하다 낮은 출력 of Channel 1 and Channel 2 to the inputs of your subwoofer amp작성자(들).
4. 연결하다 높은 출력 of Channel 1 and Channel 2 to the inputs of your main speaker amp작성자(들).
5. 조정하다 X-OVER 주파수 knobs for Channel 1 and Channel 2 to set the desired crossover point between your low and high frequency speakers. A common starting point is around 80-120 Hz for subwoofers.
6. 사용하세요 얻다 knobs for Input, Low Output, and High Output to balance the levels between your speakers.
7. 참여하세요 40Hz LOW CUT filter if you wish to remove very low frequencies from your main speakers, especially if your subwoofers handle these frequencies.

5.3 Mono 3-Way Crossover Setup

In Mono 3-Way mode, the crossover splits a mono input signal into three frequency bands (low, mid, and high). This is suitable for systems requiring dedicated mid-range speakers in addition to lows and highs.

1. Connect a mono output from your mixer to the 채널 1 입력 on the rear panel. The 223xs will sum the stereo input to mono internally if both inputs are used.
2. 설정하다 방법 전면 패널의 스위치를 켜세요 모노 3웨이.
3. 연결하다 낮은 출력 to your low-frequency amp리퍼.
4. 연결하다 MID OUTPUT to your mid-range amp리퍼.
5. 연결하다 높은 출력 to your high-frequency amp리퍼.
6. 조정하다 X-OVER 주파수 knobs to define the separation points between low, mid, and high frequencies.
7. 사용하세요 얻다 knobs for Input, Low Output, Mid Output, and High Output to achieve proper level balance.

5.4 설치 방법 시연 영상

Watch this video for a detailed guide on setting up your dbx 223xs crossover (demonstrated with a similar RX230 model).

Video: A detailed guide on how to set up a Rockville RX230 crossover, demonstrating connections to amplifiers, subwoofers, and mixers, and explaining the function of various controls for optimal sound separation.

6. 작동 모드

6.1 Stereo 2-Way Operation

In Stereo 2-Way mode, the 223xs processes two independent stereo channels. Each channel's input signal is divided into a low-frequency band and a high-frequency band. This allows for precise control over the audio sent to your main speakers and subwoofers, optimizing their performance and preventing frequency overlap.

6.2 Mono 3-Way Operation

In Mono 3-Way mode, the 223xs sums the stereo input to a mono signal and then divides it into three distinct frequency bands: low, mid, and high. This configuration is ideal for systems that utilize dedicated amplifiers and speakers for each of these frequency ranges, providing maximum control and clarity in a mono sound environment.

6.3 Supplementary Videos on Crossover Functionality

These videos demonstrate the functionality of similar crossover units, providing additional context on how to utilize such devices in various audio setups.

Video: A brief demonstration of a stereo crossover unit in an outdoor stage performance setting, highlighting its application in live sound.

비디오: 오버view of a professional 2/3 way stereo/4 way mono crossover, showcasing its features and potential applications in audio management.

Video: A demonstration of a 234XL Stereo 2/3 Way crossover, illustrating its controls and how it processes audio signals.

7. 유지관리

• 청소: 부드럽고 마른 천으로 제품을 닦으십시오. 연마성 세제나 용제는 사용하지 마십시오.
• 통풍: 과열을 방지하기 위해 장치 주변의 적절한 환기를 유지하세요. 환기구를 막지 마세요.
• 저장: 본 제품은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.

8. 문제 해결

• 소리 없음: Check all cable connections (inputs, outputs, power). Ensure all connected devices (mixer, amplifiers, speakers) are powered on and set to appropriate volume levels. Verify the MODE switch is correctly set.
• 왜곡: Reduce input gain on the 223xs and/or your mixer. Check output gain levels to ensure they are not clipping your amplifiers. Verify crossover frequency settings are appropriate for your speakers.
• 고르지 못한 소리: Adjust individual output gain controls for low, mid, and high frequencies to achieve a balanced sound. Check phase inversion switches if certain frequencies sound thin or out of phase.

9. 사양

10. 보증 및 지원

The dbx 223xs Crossover comes with a Limited Warranty. For detailed warranty information, please refer to the included Quick Start Guide or contact dbx customer support.

For any questions, comments, or concerns regarding your dbx 223xs, please reach out to dbx customer support.