1. 서론
This manual provides instructions for the safe and efficient use of your Philips 22316 Incandescent Light Bulb. This bulb is designed for specific applications requiring infrared heat and illumination. Please read this manual thoroughly before installation and use, and retain it for future reference.
Image 1.1: Philips 22316 Incandescent Light Bulb. This image shows the BR40 shaped incandescent bulb, highlighting its reflective surface and standard E27 base.
2. 중요한 안전 정보
화재, 감전, 신체 상해의 위험을 줄이려면 전기 제품을 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.
- 전원 끄기 : 전구를 설치하거나 교체하기 전에 항상 전원을 차단하십시오.
- 올바른 볼륨tage: 조명기구의 볼륨을 확인하세요tage는 전구의 볼륨과 일치합니다.tage(230-250V).
- 올바른 기준: Use only in fixtures designed for an E27 base.
- 열: Incandescent bulbs generate significant heat. Do not touch the bulb when it is operating or immediately after turning it off. Allow it to cool completely.
- 고정물 호환성: Use only in appropriate fixtures that can safely handle the bulb's wattage (250W) and heat output.
- 실내에서만 사용 가능: This bulb is rated for indoor use. Do not expose to moisture or outdoor elements.
- 인화성 물질: 가연성 물질에서 멀리 두세요.
- 처분: 사용한 전구는 해당 지역 규정에 따라 폐기하세요.
3. 설정 및 설치
- 전원 확인: Ensure the power supply to the light fixture is turned off at the circuit breaker or wall switch.
- 전구 풀기: Carefully remove the Philips 22316 bulb from its packaging. Avoid touching the glass with bare hands, as oils can reduce bulb life.
- 고정물 검사: Check the light fixture for any damage or wear. Ensure it is clean and dry.
- 전구에 나사로 고정: Gently screw the bulb into the E27 socket of the fixture. Turn clockwise until it is snug, but do not overtighten. Overtightening can damage the bulb or the fixture.
- 복원력 : 전구를 제대로 설치했으면 조명기구에 전원을 다시 공급하십시오.
4. 사용 설명서
The Philips 22316 Incandescent Light Bulb operates like a standard incandescent bulb. It is designed for applications requiring both light and infrared heat.
- 켜기/끄기: Use the wall switch or the fixture's integrated switch to turn the bulb on or off.
- 열 출력 : This 250W bulb produces significant heat. Ensure adequate ventilation around the fixture to prevent overheating.
- 디밍 : While some incandescent bulbs are dimmable, this specific model's dimming compatibility is not explicitly stated. Using a dimmer not rated for incandescent loads or the bulb's wattage may cause damage or malfunction.
5. 유지관리
Minimal maintenance is required for this incandescent light bulb.
- 청소: Before cleaning, ensure the power is off and the bulb is completely cool. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- 대사: When the bulb reaches the end of its life, ensure power is off and the bulb is cool before carefully unscrewing it from the fixture. Replace with a new Philips 22316 or an equivalent bulb with matching specifications (250W, 230-250V, E27 base).
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전구가 켜지지 않습니다. |
|
|
| 전구가 깜박입니다. |
|
|
| 전구가 빨리 타버립니다. |
|
|
7. 제품 사양
| 상표 | 필립스 |
| 모델 번호 | 22316 |
| 라이트 타입 | 백열전구 |
| 왓tage | 250 와트 |
| 전구 모양 크기 | BR40 (Equivalent to BR125 Europe) |
| 전구베이스 | E27 |
| 권tage | 230-250 볼트 |
| 밝은 색상 | Warm White (Infrared) |
| 명도 | 250루멘 |
| 연결 기술 | 적외선 |
| 실내/실외 사용 | 실내 |
| 재료 유형 | 구리 |
| 품목 무게 | 160그램 |
8. 보증 정보
Philips products are manufactured to high quality standards. For specific warranty details regarding your Philips 22316 Incandescent Light Bulb, please refer to the warranty card included with your purchase or visit the official Philips web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
9. 고객 지원
If you have any questions or require assistance with your Philips 22316 Incandescent Light Bulb, please contact Philips customer support. Contact information can typically be found on the product packaging or the official Philips web대지.