1. 서론
This manual provides instructions for the safe and efficient operation of your Intermatic TN111CL Lamp & Appliance Timer. Please read these instructions thoroughly before using the device and retain them for future reference. The TN111CL timer is designed to automatically turn lamps and appliances ON and OFF at preset times, offering convenience and energy management.
2. 안전 지침
- 실내에서만 사용 가능: This timer is intended for indoor use in dry locations. Do not expose to rain or moisture.
- 전기 등급 : Do not exceed the electrical ratings of the timer. Refer to the 'Specifications' section for details. Overloading the timer can cause overheating and fire.
- 접지: 타이머가 접지된 콘센트에 제대로 꽂혀 있는지 확인하십시오.
- 어린이들: 어린이의 손이 닿지 않는 곳에 보관. 이것은 장난감이 아닙니다.
- 청소: 청소하기 전에 타이머의 플러그를 벽면 콘센트에서 뽑으세요. 마른 천을 사용하세요. 액체 세제는 사용하지 마세요.
- 수리: Do not attempt to repair or disassemble the timer. Refer all servicing to qualified service personnel.
3. 제품 오버view
The Intermatic TN111CL is a mechanical timer featuring an easy-set dial for scheduling ON/OFF operations. It is designed for use with various lamp소형 가전제품.
주요 특징:
- 2 ON/OFF settings per 24-hour period.
- Easy-Set Dial for simple programming.
- Minimum ON/OFF time: 1/2 hour.
- Maximum ON/OFF time: 23 1/2 hours.
제품 다이어그램:

그림 1: 전면 view of the Intermatic TN111CL Lamp & Appliance Timer, showing the central dial and outlet.
4. 설정
- 타이머를 연결하세요: 타이머를 일반적인 125V AC 벽면 콘센트에 꽂으세요.
- 현재 시간 설정: Rotate the entire dial clockwise until the current time aligns with the arrow indicator on the timer's face. The dial is marked in 15-minute increments. Ensure you distinguish between AM and PM hours (e.g., 3 PM is 15:00 on a 24-hour clock).
- 플러그인 가전제품: l을 꽂으세요amp or appliance you wish to control into the outlet on the side of the timer. Ensure the appliance's power switch is in the ON position.
5. 사용 설명서
The TN111CL timer uses a series of pins around the dial to set ON and OFF times.
- 핀 식별: The dial has segments that can be pushed inwards or pulled outwards. Each segment represents 15 minutes.
- 켜짐 시간 설정: To set a period when the appliance should be ON, push the corresponding segments (pins) inwards. For example, if you want the appliance ON from 6:00 PM to 10:00 PM, push in all the pins between the 18:00 and 22:00 marks on the dial.
- 꺼짐 시간 설정: To set a period when the appliance should be OFF, pull the corresponding segments (pins) outwards. These are the default positions for the pins.
- 수동 재정의: The timer typically has a manual override switch (often a small slider or button) that allows you to turn the connected appliance ON or OFF independently of the timer settings. Refer to the markings on your specific unit for its location and function (e.g., 'Timer ON', 'Timer OFF', 'Always ON').
The timer will cycle through the programmed ON/OFF settings daily. The minimum ON or OFF duration is 30 minutes (two 15-minute segments).
6. 유지관리
- 청소: To clean the timer, unplug it from the wall outlet. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
- 저장: If storing the timer for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- 점검: Periodically inspect the timer and its cord for any signs of damage, such as frayed wires or cracks. If damage is found, discontinue use and replace the unit.
7. 문제 해결
- 기기가 설정된 시간에 켜지거나 꺼지지 않습니다.
- Ensure the timer is plugged firmly into a working outlet.
- Verify the appliance plugged into the timer is switched to the ON position.
- 시계 다이얼에 현재 시간이 정확하게 설정되어 있는지 확인하십시오.
- Confirm that the ON/OFF pins are correctly pushed in (ON) or pulled out (OFF) for the desired times.
- Check the manual override switch position.
- Timer makes a ticking sound:
- This is normal for mechanical timers and indicates the internal clock mechanism is operating.
- Appliance remains ON or OFF constantly:
- Check the manual override switch. It may be set to 'Always ON' or 'Always OFF'.
- Re-verify the pin settings for your desired ON/OFF schedule.
8. 사양
| 사양 | 값 |
|---|---|
| 모델 번호 | TN111CL |
| 권tage | 125 볼트 AC |
| 빈도 | 60Hz |
| Resistive Load (R) | 15 Amp초, 1750와트 |
| Tungsten Load (T) | 1750 와트 |
| Inductive Load (H) | 1750 와트 |
| Motor Load (TV-5) | 1/3 HP |
| 켜짐/꺼짐 설정 횟수 | 2 per 24-hour period |
| 최소 켜짐/꺼짐 시간 | 1 / 2 시간 |
| Maximum ON/OFF Time | 23 1/2시간 |
9. 보증 및 지원
보증:
This Intermatic TN111CL Lamp & Appliance Timer comes with a 평생 보증보증 청구를 위해 구매 증빙 서류를 보관하세요.
고객 지원:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support directly. Refer to the official Intermatic web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.