소개
This manual provides instructions for the Fender 099-4051-000 2-Button Vintage-Style Footswitch. This accessory is designed to control the reverb and vibrato functions on compatible Fender vintage와 새로운 amplifiers equipped with RCA jack inputs for footswitches. It features a durable construction and two push-button switches for convenient effect activation.
설정
- 호환성 검사 : Ensure your Fender amplifier is designed to accept a 2-button footswitch with RCA jack connections for reverb and vibrato control. This footswitch is specifically for amplifiers with RCA inputs, not 1/4-inch jacks.
- Locate Footswitch Jacks: Identify the RCA footswitch input jacks on the rear panel of your amplifier. These are typically labeled "Reverb" and "Vibrato" or similar.
- Connect the Footswitch: Carefully insert the RCA plugs from the footswitch cable into the corresponding RCA jacks on your amplifier. The footswitch cable has two RCA connectors. While the wires are not explicitly labeled on the footswitch itself, the connection points on the pedal generally align with the vibrato and reverb functions. If unsure, refer to your amplifier's manual for specific jack assignments.
- Position the Footswitch: Place the footswitch on the floor in a convenient location for easy access during play.
Image: The Fender 2-Button Vintage-Style Footswitch, showing its two push-buttons and the coiled cable terminating in two RCA connectors. A hand is visible for scale, indicating the product's size.
작동 지침
Once the footswitch is correctly connected to your amplifier, you can use it to engage or disengage the reverb and vibrato effects.
- 리버브 컨트롤: Press the button designated for reverb to toggle the amplifier's reverb effect on or off.
- Vibrato Control: Press the button designated for vibrato to toggle the amplifier's vibrato (or tremolo) effect on or off.
- 활성화: 어떤 사람들에게는 amplifiers, a firm press may be required to ensure proper activation of the switch.
유지
- 청소: Wipe the footswitch housing with a soft, dry cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents.
- 케이블 관리: Avoid kinking or sharply bending the cable. Store the cable neatly coiled when not in use to prevent damage.
- 저장: 풋스위치는 건조한 환경에 보관하고, 극심한 온도 변화와 습도를 피하십시오.
- 점검: Periodically inspect the cable and RCA connectors for any signs of wear or damage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Footswitch does not activate effects. | Incorrect connection; incompatible amplifier; loose RCA plugs; faulty footswitch. | Ensure RCA plugs are fully inserted into the correct jacks on the amp증폭기. 확인 amplifier compatibility (RCA inputs required). Test with another compatible footswitch if available. Ensure a firm press on the button. |
| Intermittent effect activation. | Loose connection; worn cable; dirty RCA contacts. | Check all connections. Gently clean RCA plug contacts if necessary. Inspect the cable for damage. |
| One effect activates, but the other does not. | Incorrect RCA plug assignment; internal switch issue. | Confirm the correct RCA plug is connected to the corresponding effect jack on the amplifier. If the issue persists, the footswitch may require service. |
명세서
- 모델 번호: 099-4051-000
- 상표: 펜더
- 스타일: 발 스위치
- 버튼 수: 2
- 커넥터 유형: (주)알에이씨에이
- 오디오 출력 효과: Reverb, Vibrato
- 품목 무게: 0.85파운드(약 0.39kg)
- 품목 크기: 3.31 x 6.4 x 6.4인치(약 8.4 x 16.3 x 16.3cm)
- 전원: Corded Electric (passive, draws power from amp리피어)
- 제조업체 부품 번호: 0994051000
- 한국어: 885978008940, 717669507367
보증 및 지원
The manufacturer's warranty description for this product states "None." For any issues or inquiries regarding your Fender 099-4051-000 Footswitch, please contact Fender customer support directly through their official website or authorized service centers. Keep your purchase receipt for reference.