AGUNTO-LOGO

AGUNTO AGU-BA1 실외 보안 카메라

AGUNTO-AGU-BA-Outdoor-Security-Camera-PRODUCT

제품 카테고리

AGUNTO-AGU-BA1-Outdoor-Security-Camera-FIG-1

  • 비디오 비트: 적응
  • Accu: 5000mAh (total)
  • 와이파이: 2.4GHz 802.11.n/g/n

기술적 인 파라미터

  • 해상도 : 1920 × 1080
  • View잉 각도: 135
  • Audio: Built-in speaker & microphone
  • 모션 감지: PIR 센서
  • 녹음 방식: SD max. 128GB / 클라우드 스토리지
  • 전력 소비: 대기 200uA, 작동 260mA

앱 다운로드 및 설치

Quick download APP by scanning QR code as following  Or search for ‘TuyaSmart’ app in Apple App store or Google Play store, or scan the above QR code to download.

카메라는 2.4GHz WiFi만 지원하고 5GHz WiFi 라우터는 지원하지 않습니다. 라우터가 2.4GHz 연결인지 확인하십시오. 제공업체에서 쉽게 전환할 수 있습니다.

등록 및 로그인 

Open the APP, if you haven’t account, click on the ‘Sign Up’. (figure 1) enter the registration screen, enter a phone number registered account. Registration is completed, then login APP. After login the APP, can be directly select ‘add device’ or choose to create family after add device, create family methods: APP at the bottom right corner click on ‘my’ choose ‘family management, ‘my home’ fill in the information and save (figure 2).

기기 추가

In the APP home page, click on ‘Add device’. select ‘Security & Video Surveillance-Smart Camera (Wi-Fi) (figure 3). to add device. Select ‘Smart Camera (Wi-Fi).AGUNTO-AGU-BA1-Outdoor-Security-Camera-FIG-2

Please reset the device first, then make sure you heard a prompt tone or make sure the indicator is flashing rapidly. (depends on device). (figure 4). If you heard a prompt tone or saw a flashing red light, choose ‘Make sure the indicator is flashing quickly or a prompt tone is heard’. Click ‘Next’. Enter the WiFi password (figure 5), and click ‘Next’.AGUNTO-AGU-BA1-Outdoor-Security-Camera-FIG-3

Now you will see a QR code, aim the QR code on camera lens about 15cm to 20cm (figure 7). When hearing a sound/prompt, click on ‘I heard a prompt’. Tap on ‘Next’. The device will connect to your WiFi-network, please wait until complete. (Figure 8). Appear (figure 8) page, that device has been added succesfully. Here you can choose a name for this device.AGUNTO-AGU-BA1-Outdoor-Security-Camera-FIG-4

VIEW & 설정

Click on the device you just added. This screen is the control panel of the camera (see: Figure 9). Below you will see features such as screenshot, voice, recording, alarm settings and so on. If you click on the ‘pencil’ at the top right, you will go to the settings screen. (See: Figure 10). Here you can find all the settings of the device such as: Sensitivity of the motion sensor, battery life, storage management and so on.AGUNTO-AGU-BA1-Outdoor-Security-Camera-FIG-5

자주하는 질문

  • Q: How to share the device?
    A: In real time video-screen, click the top right corner device button to enter settings. Click on “share equipment”, then click ‘add device’ sharing by enter phone number or email address and click on ‘finish’.
  • Q: How to check camera abnormal offline?
    A: 1. Check the power supply and the network is working normal
    2. Reset the device (with reset-pin).
    3. Check if you are on 2.4GHz frequency (Router settings).
  • Q: How to switch the router to 2.4GHz WiFi?
    A: Your respective provider can easily switch this for you, ask them to set the WiFi network to a 2.4 frequency.
  • Q: 해도 될까요? view 여러 장치에서?
    A: Yes, the other user must log in to the agunto app with the same account, the camera is already linked to the account. Or you can make a family and add your family members with their account.
  • Q: I still have questions, where can I ask them?
    A: E-mail your question with order number to [이메일 보호], 영업일 기준 3일 이내에 응답해 드리겠습니다.

문서 / 리소스

AGUNTO AGU-BA1 실외 보안 카메라 [pdf] 사용 설명서
카메라, 실외 보안 카메라, 보안, 실외, AGU-BA1

코멘트를 남겨주세요

귀하의 이메일 주소는 공개되지 않습니다.