USER’S MANUAL
iPad case with keyboard
K:43-351-176 | T:68-736-408
Recharge the keyboard
- If the keyboard battery light indicator is flashing red, please recharge the keyboard.
- Insert the USB charging cable at the keyboard and USB port on the computer, indicator become steady Red light, shows it is recharging the keyboard.
when the red light disappear, it means the keyboard full charge. - The keyboard for about 3-4 hours to fully charge.
- Customer can use a 5V, 1A charger to charge.
Maintenance:
Preserve the keyboard under normal temperature, recharge under normal voltage.
If do not use for long time, need to timely charge (About once in a week)
Product parameter
- Working Voltage 4.75V~ 5.25V
- Battery Capacity 180 mAh
- Charging Time 3-4 hours
- Operating Temperature -10±55°C
Compatible with below models
Compatible with iPad 7th, 8th and 9th generations.
Features
Super-slim and portable.
Product features
The system switching method:
Android system: 
+ 
Windows system: + 
IOS system: + 
+ shortcut key to make the function work :
+ 
Home + 
+ 
Search
+ 
Select all + 
Copy + 
Paste
+ 
Cut + 
Last song + 
Play/Pause
+ 
Next song + 
+ 
Volume +
+ 
Lock screen
+ 
Switch to Android + 
Switch to Win
+ 
Switch to IOS + 
Virtual keyboard
+ 
Lock touch + 
Switch languages
Note:
- If you want you type the words like “@” “#” “%”, you need to press the shift button + corresponding key, for example:
+ 
- Some Characters Shortcuts:
Selection :
+ 
Copy : + 
Cut : + 
Paste: + 
Finger gestures supported on touchpad
 |  |  |  |
| Three-finger swipe slowly right/left –Change apps | Three-finger swipe down/up-Back to home page / last used App | Two-finger slide to both sides–Page zoom in or out | Two-finger swipe down/up –scroll the page |
Activate touch function (IOS system)
Step 1. Please upgrade your iPad system to IOS 13.0 Version or above
Step 2. go to the iPad accessibility setting to activate assistive touch function: Setting – Accessibility – Touch – Assistant Touch
Note:
This operation is not required for Android / Windows system devices
+ 
: Control keyboard touchpad switches
Bluetooth connection steps
1. Turn on the keyboard, then press + 
to open Bluetooth signal. Bluetooth indicator of the keyboard will flash blue light.
2. Open your Tablet, select “Setting – Bluetooth”.
3. open your Bluetooth signal, keep the Bluetooth showing “on” search state.
4. In the list of available, select the one that says “Bluetooth 3.0 keyboard”.
Bluetooth signal light go out, connection is successful.
Documents / Resources
 | kmart K43-351-176 iPad Case with Keyboard [pdf] User Manual K43-351-176, K43-351-176 iPad Case with Keyboard, iPad Case with Keyboard, Case with Keyboard, Keyboard |
