DATA FROG BT 5.2 RGB LED JoyCon Gamepad Installation and Disassembly Guide
Introduction
This guide provides detailed instructions for the installation and disassembly of the DATA FROG BT 5.2 RGB LED JoyCon Gamepad with a Nintendo Switch console. The video demonstrates a new, patented installation method for secure attachment and easy removal.
Installation Method
Follow these steps to correctly install your DATA FROG JoyCon Gamepad:
- Press and Hold Lock Button: Locate the lock button on the back of the controller and press and hold it down.
- Align and Push: While holding the lock button, align the controller with the side rail of your Nintendo Switch console. Push the controller downwards along the rail until it slides into place and locks securely.
Disassembly Method
To remove your DATA FROG JoyCon Gamepad from the Nintendo Switch console, follow these instructions:
- Press and Hold Lock Button: Locate the lock button on the back of the controller and press and hold it down.
- Push Controller Upwards: While holding the button, push the controller upwards along the rail, away from the console.
- Turn Controller (if necessary): Depending on the specific locking mechanism, you may need to slightly turn the controller while holding the button to fully disengage it.
- Remove Controller: Continue pushing the controller upwards until it detaches completely from the Nintendo Switch console.
