Adhesion Tester Manuals & User Guides

DeFelsko AT-M Pull Off Adhesion Tester Introduction The PosiTest AT-M Pull-Off Adhesion Tester measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is calculated based on force and test…

PCE-CRC 10 Adhesion Tester v1.0 User Manual PCE-CRC 10 Adhesion Tester User manuals in various languages www.pce-instruments.com Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be…

elcometer 510 ឧបករណ៍វាស់ស្ទង់ភាពស្អិតជាប់ដោយស្វ័យប្រវត្តិVIEW Actuator Lanyard Ring Shoulder Strap Connections Battery Compartment LED Indicators - Red (left), Green (right) Multifunction Softkeys\ On/Off Key USB Data Output Socket (below cover) LCD Display Actuator Skirt Quick Connect…

User Guide Elcometer 510 Model T Automatic Adhesion Tester For the avoidance of doubt, please refer to the original English language version. Gauge Dimensions: 260 x 100 x 66mm (10.3 x 3.9 x 2.6") Gauge Weight: With 10mm, 14.2mm &…

elcometer 510s មគ្គុទ្ទេសក៍អ្នកប្រើប្រាស់ តេស្តភាពស្អិតដោយស្វ័យប្រវត្តិ 1 រង្វាស់VIEW 2 BOX CONTENTS 3 USING THE GAUGE 4 GETTING STARTED 4.1 FITTING THE BATTERIES 4.2 SELECTING YOUR LANGUAGE 4.3 SCREEN SETTINGS 4.4 SETTING UP THE READING DISPLAY 4.5 SELECTING THE…

User Guide (en) Elcometer 107 Cross-Hatch Adhesion Tester For the avoidance of doubt, please refer to the original English language version. Gauge Dimensions: 165 x 30 x 45mm (6.5 x 1.2 x 1.8") Gauge Weight: 370g (13oz) Elcometer is a…