សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 09 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 04:49 យប់
Discomfort while using the ម៉ូនីទ័រសម្ពាធឈាម could be caused by various factors. Here are some possible reasons and solutions based on the product manual:
1. **Cuff Placement:** Ensure that the cuff is placed correctly on your arm. The bottom of the cuff should be approximately 1-2cm above your elbow joint.
2. **Body Position:** Maintain an upright position while testing. Sit in a relaxed position with your arm level with your heart.
3. **Feeling Anxious or Nervous:** Take a few deep breaths and try to relax before testing.
4. **Arm Movement:** If there is movement during the measurement, it may affect the accuracy of the results. Try to keep your arm still during testing.
5. **Cuff Fit:** Make sure the cuff is not too tight or too loose. It should be snug on your arm.
6. **Cuff Condition:** Check if the cuff is properly worn. If the cuff is loose, adjust it and measure again.
7. **Proper Maintenance:** Regularly clean and maintain the blood pressure monitor as per the cleaning instructions provided in the សៀវភៅដៃ.
If discomfort persists despite following these guidelines, it's advisable to consult the manufacturer or a healthcare professional for further assistance.
បន្ថែមមតិយោបល់ថ្មី។