សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 03 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 03:30 យប់
ដើម្បីដំឡើង QNAP QuTS hero ប្រព័ន្ធប្រតិបត្តិការ ZFS-Based on your NAS, follow these steps:
1. **Prepare the SSD/HDD:** Ensure you have compatible SSDs or HDDs for your NAS model. Refer to the compatibility list at http://www.qnap.com/compatibility. Note that all drive data will be cleared upon SSD/HDD initialization.
2. **Mount the Drives:** For 18/22-bay NAS, use 3.5-inch SATA HDDs. For 30-bay NAS, use 3.5-inch SATA HDDs. For 18/22-bay NAS, use 2.5-inch SATA SSDs. For 30-bay NAS, use 2.5-inch SATA SSDs.
3. **Secure the Drives:** Tighten the screws to prevent the tray from getting stuck to the chassis.
4. **Download the Operating System:** Visit the Download Center at www.qnap.com/download to download the QuTS hero ZFS-Based Operating System.
5. **Installation:** Follow the installation instructions provided in the operating system download. Ensure you follow the steps carefully to complete the installation process.
If you encounter any issues during the installation process or have specific questions related to your NAS model, you can refer to the full guides and utilities available in the Download Center. Additionally, for any further technical support or assistance, you can visit install qnap, service qnap, or contact QNAP customer support.
For regulatory compliance and safety information, refer to the FCC Class A Notice, CE compliance Class A, WEEE directive guidelines, and the warning regarding the lithium button battery included in the product.
បន្ថែមមតិយោបល់ថ្មី។