សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 04:08 យប់
To pair multiple radiators with the Electrorad Touch3 គ្រប់គ្រងច្រកវ៉ាយហ្វាយ and set different heating modes for each room, follow these steps:
1. **Pairing Radiators:**
- Press the "Main menu" button, then press the "Parameter setting" button (long press).
- Select radio pairing and choose the device (Heating).
- Select the room and press the "Green check" button to confirm.
- Put the device (radiator or remote control) in pairing mode as per the device leaflet or manual instructions.
- Start the pairing process by pressing the "radio pairing" button and follow the on-screen instructions for each device.
2. **Setting Different Heating Modes for Each Room:**
- From the "Start screen," press the "Home" button.
- Press the "Current mode" button to select the mode you want to set for the room (Comfort, Auto, Reduced, Timer, Frost protection, Off).
- Define the temperature and program settings for each mode using the corresponding buttons on the screen.
- Press the "Green check" button to confirm the settings.
3. **Defining Temperatures for Each Zone:**
- From the "Start screen," press the "Home" button.
- Press the "Current mode" button and select either "Comfort" or "Reduced" mode.
- Adjust the temperature using the "+" or "-" buttons.
- Press the "Heating" button to save the temperature for that zone.
By following these steps, you can pair multiple radiators with the Electrorad Touch3 គ្រប់គ្រងច្រកវ៉ាយហ្វាយ and customize heating modes and temperatures for each room or zone in your setup. For more detailed instructions, refer to the Electrorad Touch3 Control Wifi Gateway instruction manual.
បន្ថែមមតិយោបល់ថ្មី។