សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 03:22 យប់
To check the status of single and dual phone lines using the Triplett TLT10 Telephone Line Testerអនុវត្តតាមជំហានទាំងនេះ៖
1. Plug the tester into an RJ11 phone jack.
2. Observe the Line 1 and Line 2 LED indicators on the tester.
3. If both LEDs illuminate green, it indicates that both lines are active and wired properly.
4. If only one LED illuminates, it means that the jack is wired for a single line. The illuminated LED corresponds to the active line.
Refer to the user manual for further details on interpreting the LED indicators and troubleshooting any issues. Remember to follow the safety warnings and guidelines provided in the manual to ensure safe and efficient use of the tester.
If you encounter any difficulties or have further questions about using the Triplett TLT10 Telephone Line Tester, refer to the user manual or contact Triplett / Jewell Instruments for assistance.
បន្ថែមមតិយោបល់ថ្មី។