សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 11:49 ព្រឹក
To manually run the MyQ DDI on a test computer before implementing it on the domain server, follow these steps:
1. **Configure MyQDDI.ini and MyQDDI.csv:**
- Set up the MyQDDI.ini file with all the necessary parameters for printer ports and printer drivers.
- Create the MyQDDI.csv file to set up variable IP addresses of the printer port for automatic reconfiguration.
2. **Run MyQDDI.ps1:**
- Locate the MyQDDI.ps1 file in your MyQ folder (usually in C:\Program Files\MyQ\Server).
- Execute the MyQDDI.ps1 file as an administrator from PowerShell or the command line console.
3. **Check MyQDDI Window:**
- After running the script, the MyQDDI window will appear, displaying information about each step of the installation process.
- Ensure that all operations specified in the MyQDDI.ini file are processed without any errors.
4. **Verify Installation:**
- Check if the printer ports and printer drivers are installed correctly on the test computer.
- Confirm that the printer settings and configurations are as expected.
5. **Check MyQDDI.log:**
- To verify the success of the operations, you can also check the MyQDDI.log file for detailed information about the installation process.
By following these steps, you can manually run the MyQ DDI on a test computer to ensure that the printer drivers are installed correctly before deploying the solution on the domain server.
បន្ថែមមតិយោបល់ថ្មី។