សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 11:06 ព្រឹក
To switch between the connected devices using the 4x1 USB HDMI KVM Switch 4Kx2Kអ្នកអាចអនុវត្តតាមជំហានទាំងនេះ៖
1. **Front Push Buttons:** You can switch between the connected devices by pressing the Port Select button (labeled as "I" in the layout section of the manual) on the KVM switch. Each press of the button will cycle through the available HDMI sources.
2. **Hotkeys:** Alternatively, you can use hotkey commands to switch between devices. The manual provides a list of hotkey commands for various operating functions. For example, to switch to a specific device, you can use the hotkey combination mentioned in the manual.
3. **Port LED Indication:** The Port LED (labeled as "H" in the layout section of the manual) will indicate which HDMI source is currently selected, helping you identify the active device.
By utilizing either the front push buttons or hotkey commands, you can easily switch between the connected devices and display their content on the shared រន្ធ HDMI បង្ហាញ។
បន្ថែមមតិយោបល់ថ្មី។