សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 02 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 09:45 ព្រឹក
To set up and balance your ឧបករណ៍ភ្ជាប់ iOptron CEM26សូមអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានរៀបរាប់នៅក្នុងសៀវភៅណែនាំអ្នកប្រើប្រាស់៖
1. **Mount Head Setup:** Ensure the RA and DEC Gear Switches are in the unlock position before removing the mount head from the package. If your mount has an AccuAlign optical polar scope, the Allen wrench will not be inserted in the RA axle.
2. **Tripod Setup:** Thread the Alignment Peg onto the tripod head, insert the Accessory Tray, and secure the setup by tightening the Locking xxxx . Adjust the tripod legs to level the mount using the built-in Bubble Level Indicator.
3. **Attach Mount Head:** Before placing the mount on the tripod, ensure the RA gear switch is locked. Secure the mount head by tightening the Azi Locking Screws into the M6 holes on the tripod.
4. **Adjust Latitude:** Loosen the Latitude Locking Lever, adjust the latitude using the Latitude Adj. xxxx , and tighten the lever once the arrow points to the current latitude on the scale.
5. **Install Counterweight:** Thread the CW shaft into the mounting holes, load the counterweight ensuring the mount is at its zero position, and balance the assembly in both DEC and RA axes.
6. **Install Telescope:** Slide the telescope dovetail plate into the Vixen dovetail saddle and tighten the Saddle Locking xxxx .
7. **Balance Payload:** Balance the mount head assembly in both DEC and RA axes to minimize stress on the driving mechanism. Ensure the Gear Switches are disengaged during the balancing process.
8. **Polar Alignment:** Perform iPolar or AccuAlign polar alignment procedures as detailed in the user manual for accurate tracking.
9. **Manual Operation:** Use the hand controller to point the telescope to desired objects, change slewing speed, and start tracking.
10. **Return to Zero Position:** After observing, return the mount to Zero Position, disengage the gear system for transportation, and lock the RA axis with the Allen wrench.
ដោយអនុវត្តតាមជំហានទាំងនេះ និងយោងទៅ សៀវភៅណែនាំអ្នកប្រើប្រាស់ for detailed instructions, you can set up and balance your iOptron CEM26 mount effectively for optimal performance.
បន្ថែមមតិយោបល់ថ្មី។