សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 05:33 យប់
To set up and control the Lytmi HSA20R LED Controller for your TV backlight, follow these steps:
1. ** ការដំឡើង៖ **
- Clean the surface behind your TV to ensure it's dust-free and dry.
- Attach the strip lights to the back of the TV, pressing them firmly and securing them with the provided clips.
- Connect the HDMI cables and the light strip to the sync box.
2. **Quick Calibration on Sync Mode:**
- Check if the LED colors match the reference image under sync mode. If not, re-select the LED direction.
- You can also calibrate using the phone app.
3. **Control the Light:**
- Control via the sync box:
- Ensure your Wi-Fi is on 2.4GHz, turn on Bluetooth and GPS/location on your phone.
- Register and log in to the app, which will detect the HDMI2.0 Sync Box SE automatically.
- Control via smart assistance:
- Voice commands are supported after setup.
- Use the app or voice commands to change modes, colors, and intensity.
4. **ការដោះស្រាយបញ្ហា៖**
- If you cannot use sync mode, ensure the sync box is connected to an external HDMI input device and the indicator is in sync mode.
- If you cannot connect with the app, ensure your Wi-Fi is on 2.4GHz and GPS/Bluetooth are on. Reset the sync box if needed.
- If the strip light does not light up, check connections and try other scene modes in the app.
5. **Support and Warranty:**
- For any questions or missing items, contact the support team with your order number at support@ilytmi.com.
- The device comes with a 12-month limited warranty and lifetime technical support.
By following these steps and troubleshooting tips, you should be able to set up and control your Lytmi HSA20R LED Controller effectively for your TV backlight.
បន្ថែមមតិយោបល់ថ្មី។