សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 05:04 យប់
To ensure compatibility and prepare your graphics card for installing the ALPHACOOL Eisblock Aurora Acryl RTX 4070TI យោងជាមួយផ្ទាំងខាងក្រោយអនុវត្តតាមជំហានទាំងនេះ៖
1. **ពិនិត្យមើលភាពត្រូវគ្នា៖**
- Before starting the cooler assembly, compare your graphics card with the pictures in the configurator provided by Alphacool. You can visit hwconfig and search for your graphics card or cooler model.
- For definitive identification, compare the PCB number. The cooler was designed for a specific PCB layout, and it's important to ensure compatibility.
- Graphics card manufacturers may revise the design slightly, so make sure the cooler fits your specific model to avoid any issues during assembly.
2. **រៀបចំកាតក្រាហ្វិក៖**
- Place the hardware on an antistatic mat.
- Begin dismantling the original cooler by removing screws at the back of the card and carefully unhooking the fan connector.
- If the original cooler uses thermal glue, handle it with extreme care to avoid damaging parts.
- Clean the hardware of any thermal paste or pad residues using a solvent like isopropanol alcohol.
3. **ជំហានដំឡើង៖**
- Place thermal pads on the cooling block.
- Apply thermal grease as needed for optimal heat transfer.
- Install the PCB onto the cooler assembly.
- Place thermal pads on the PCB backside for additional cooling.
- Mount the PCI bracket and backplate securely.
- Connect the ARGB lighting according to the provided instructions.
- Use the provided tool to xxxx in the xxxx plugs for a secure fit.
ប្រសិនបើអ្នកជួបប្រទះការលំបាកណាមួយ ឬមានសំណួរបន្ថែមក្នុងអំឡុងពេលដំណើរការដំឡើង អ្នកអាចទាក់ទងបាន។ Alphacool International GmbH for support. Their contact information is as follows:
- Alphacool International GmbH
- Address: Marienberger Str. 1, D-38122 Braunschweig, Germany
- Support: +49 (0) 531 28874-0
- Fax: +49 (0) 531 28874 - 22
- Email: info@alphacool.com
តែងតែយោងទៅ សៀវភៅណែនាំ provided with the product for detailed installation guidelines and safety instructions.
បន្ថែមមតិយោបល់ថ្មី។