សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 04:08 យប់
ដើម្បីភ្ជាប់ ឧបករណ៍ចាប់សញ្ញាទំនាក់ទំនង Zigbee RCS3 to your smart home network, follow these steps outlined in the user manual:
1. **Connect Preparation:**
- Ensure your phone is connected to your Wi-Fi network.
- Make sure the sensor is within the effective coverage of the smart host (gateway) Zigbee network.
- Confirm that the gateway is added to your network.
2. **Download the Treatlife App:**
- Scan the QR code or search for "Treatlife" on the Apple App Store or Google Play to download the app.
- Register or log in to the app using your email address and password.
3. **Network Settings:**
- Power on the sensor and ensure your phone is connected to the network with the smart gateway added.
- Open the Treatlife app, go to the "smart Hub" page, click "Add subdevice," and select "Contact Sensor."
- Use the reset needle to press and hold the reset button on the sensor for more than 5 seconds until the network indicator flashes.
- Follow the app instructions to add the sensor to your network.
- Once added, you can find the sensor in the "My Home" list.
4. **Packing List:**
- The product package should include the Door/Window Sensor, Back Gum Paste, Battery, Reset Needle, and Product User Manual.
- Make sure to read the user manual carefully before using the product for detailed instructions.
5. **FCC Caution:**
- The device complies with FCC rules and regulations to ensure proper operation and minimal interference.
- Follow the guidelines provided in the manual to maintain compliance with FCC regulations.
ដោយអនុវត្តតាមជំហានទាំងនេះ និងយោងទៅ សៀវភៅណែនាំអ្នកប្រើប្រាស់ for detailed instructions, you can successfully connect the Zigbee RCS3 Contact Sensor to your smart home network and enjoy its functionalities for intelligent application scenes.
បន្ថែមមតិយោបល់ថ្មី។