សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 01:53 យប់
If the appliance is not sealing an empty bag, there are several troubleshooting steps you can take based on the information provided in the សៀវភៅដៃ:
1. **Check Bag Placement:** Ensure that the end of the bag is lying correctly on the sealing bar as described in the manual. The bag should be flat and without wrinkles or creases.
2. **Clean Seals and Sealing Bar:** Check that the sealing bar and the seals around the vacuum chamber are clean and free from dirt. Clean them if necessary to ensure a proper seal.
3. **Check for Bag Holes:** Seal the bag with some air in it and submerge it in water. If bubbles rise from it, the bag is leaking, and you should use another bag.
4. **Use Solis Bags:** Make sure you are using Solis vacuum bags exclusively, as using other bags may not provide optimal results and could damage the appliance.
5. **Cool Down Period:** If the appliance overheats, it may switch off automatically. Allow it to cool down before using it again.
By following these steps and ensuring proper bag placement, cleanliness of seals and sealing bar, and using the correct bags, you should be able to troubleshoot and resolve the issue of the appliance not sealing an empty bag.
បន្ថែមមតិយោបល់ថ្មី។