សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 01 ខែតុលា ឆ្នាំ 2025 - ម៉ោង 09:34 ព្រឹក
ដើម្បីដំឡើងនិងកំណត់រចនាសម្ព័ន្ធ FORENEX FR-E2Sxy Ethernet ទៅចំណុចប្រទាក់សៀរៀលអនុវត្តតាមជំហានទាំងនេះ៖
1. ** ការដំឡើងដំបូង៖**
- Connect the E2S board to your host PC directly or to a LAN.
- Ensure that the IP address of your host PC is in the same segment as the default IP address of the E2S board (192.168.0.3).
- Access the E2S board's web ចំណុចប្រទាក់ដោយការបើក a web browser. Use "admin" as both the username and password to log in.
2. **Basic Configuration:**
- ក្នុង web interface, you can change serial settings (such as baud rate and flow control) and ការកំណត់អ៊ីសឺរណិត.
- Note that if DHCP Client is disabled, you need to set the static IP address and subnet mask manually.
3. **ការកំណត់សុវត្ថិភាព៖**
- នេះ។ web interface allows you to change login accounts for the web ម៉ាស៊ីនមេ និងម៉ាស៊ីនមេ Telnet ។
- Be cautious when setting the Accessible IP list, as the E2S board can only be configured by the specified IP addresses.
4. **Ethernet Application Examples:**
- Depending on your setup (direct connection or via LAN), configure the E2S board accordingly.
- Ensure that the IP settings of the E2S board and your host device are compatible for communication.
- Follow the specific instructions for Client or Server mode operation based on your requirements.
5. **Appendices:**
- Appendix A provides details on Flow Control Packet over Ethernet for certain models.
- Appendix B explains communication with SPI devices over Ethernet for specific models.
ដោយអនុវត្តតាមជំហានទាំងនេះ ហើយយោងទៅការណែនាំលម្អិតនៅក្នុង សៀវភៅដៃ, you can successfully set up and configure the FORENEX FR-E2Sxy Ethernet to Serial interface for your specific application needs.
បន្ថែមមតិយោបល់ថ្មី។