សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 05:01 យប់
ដើម្បីរៀបចំ MOOSE CX12 Passive Stagអ៊ីម៉ូនីទ័រ as a floor monitor, follow these steps:
1. **Positioning:** Place the monitor on the floor in front of the performer or stage area where it will be used as a monitor. Ensure that the monitor is stable and securely positioned to prevent any accidents.
2. **Connection:** Connect your audio source (such as a mixer or amplifier) to the monitor using Speakon NL4 connectors. The monitor features a connector plate on the bottom with 2x Speakon NL4 connectors. Make sure to securely connect the cables to the appropriate inputs on the monitor.
3. **Power Rating:** Be mindful of the power rating of the monitor. The MOOSE CX12 has a power rating of 400W RMS and 1600W peak. Ensure that your amplifier or mixer output does not exceed these power ratings to prevent damage to the monitor.
4. **Adjustments:** Depending on the specific requirements of your setup and the performer's preferences, you may need to adjust the volume level and equalization settings on your audio source or mixer. Experiment with these settings to achieve the desired sound quality and volume level.
5. **Testing:** Before the performance or event, conduct a sound check to ensure that the ម៉ូនីទ័រ is functioning correctly and providing the desired sound reinforcement. Make any necessary adjustments to the positioning or settings to optimize the monitor's performance.
By following these steps and referring to the technical specifications provided in the manual, you can effectively set up the MOOSE CX12 Passive Stage Monitor as a floor monitor for your audio reinforcement needs.
បន្ថែមមតិយោបល់ថ្មី។