សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:33 យប់
ដើម្បីកំណត់រចនាសម្ព័ន្ធ CHIPKIN FS-8705-101 MQTT Telemetry Transport Ethernet Driver for your FieldServer, follow these steps based on the provided manual:
1. **Create Connection:**
- Click on the “Create Connection” button on the home page.
- Fill out the form with details like Name, Type (ethernet), and Parameters (Port).
- Click “Save” to add the connection.
2. **Create Node:**
- Click on the “Create Node” button to open the form.
- Fill out details like Name, Node, DataBroker, Topic, ScanInterval, Type, and QOS.
- Click “Save” to add the node.
3. **Create Task:**
- Click on the “Create Task” button to open the form.
- Fill out details like Name, Connection, Broker URL, KeepAlive, ClientId, Username, Password, and Clean.
- Click “Save” to add the task.
4. **Testing with HiveMQ MQTT Browser Client:**
- Access the HiveMQ MQTT Browser Client tool.
- Fill out the Broker Connection information (Host, Port).
- Click “Connect” to connect to the Broker.
- Setup a Subscription or Publish to test the connection.
5. **Testing FieldServer as a MQTT Subscriber or Publisher:**
- Follow the instructions in the manual to test the FieldServer as a MQTT Subscriber or Publisher using the HiveMQ MQTT Browser Client.
6. **Exporting and Importing Configurations:**
- To export the configuration, go to the system configuration page and click the Export Configuration button.
- To import a configuration, prepare a zip file with the required folders and files, then use the Import Configuration feature on the system configuration page.
By following these steps and utilizing the provided manual, you should be able to successfully configure and test the CHIPKIN FS-8705-101 MQTT Telemetry Transport Ethernet Driver on your FieldServer for data transfer using the MQTT protocol.
បន្ថែមមតិយោបល់ថ្មី។