សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:26 យប់
ដើម្បីដំឡើង EMOS ZU210.12 LED Highbay using the loop method, follow these steps as outlined in the manual:
1. **Install the loop with gasket to luminaire well in the specified position:**
- Position the loop with the gasket onto the luminaire well according to the specified location.
2. **Hang the luminaire well into the hook:**
- Hang the luminaire well onto the hook securely.
3. **Wiring 1 to power supply cable:**
- Connect the following wires from the luminaire to the power supply cable:
- Brown wire (L) to live wire
- Blue wire (N) to neutral wire
- Green wire (G) to earth wire (ground)
4. **Wiring 2 to dimmer:**
- Connect the following wires from the luminaire to the dimmer:
- Purple wire (Dim+) to dimming positive
- Grey wire (Dim-) to dimming negative
By following these steps, you can successfully install the EMOS ZU210.12 LED Highbay using the loop method. Make sure to adhere to the specified wiring connections and safety precautions mentioned in the manual for proper installation and operation of the LED Highbay luminaire.
បន្ថែមមតិយោបល់ថ្មី។