សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 12:21 យប់
ដើម្បីភ្ជាប់ FR-LVDS-D-H Single-channel Peripheral Board ទៅកាន់ឧបករណ៍បង្ហាញរបស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Identify the type of board you have:
- FR-LVDS6-D: Board for 18-bit single LVDS to DVID connector.
- FR-LVDS6-H: Board for 18-bit single LVDS to HDMI connector.
- FR-LVDS8-D: Board for 24-bit single LVDS to DVID connector.
- FR-LVDS8-H: Board for 24-bit single LVDS to HDMI connector.
2. Locate the LVDS Connector Input (W1) on the board:
- Connect the LVDS input signals to the corresponding pins on the LVDS connector. Ensure the power input, ground, and data signals are connected correctly.
3. Connect the DVID Connector Output (J1) or HDMI Connector Output (J2) based on your board model:
- For FR-LVDS6-D and FR-LVDS8-D: Use the DVID connector output.
- For FR-LVDS6-H and FR-LVDS8-H: Use the HDMI connector output.
4. Connect the DVID or HDMI connector to your display device:
- Ensure the pins on the connector match the input ports on your display device.
- Make sure to securely connect the pins to establish a stable connection.
5. Power on your display device and the FR-LVDS-D-H Single-channel Peripheral Board:
- Verify that the connections are secure and power up both devices.
6. Configure your display device to recognize the input signal from the board:
- Check the input source settings on your display device to ensure it is receiving the signal from the FR-LVDS-D-H board.
By following these steps and referring to the provided connector pin descriptions, you should be able to successfully connect the FR-LVDS-D-H Single-channel Peripheral Board to your display device.
បន្ថែមមតិយោបល់ថ្មី។