សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 12:03 យប់
To establish communication with the ម៉ូឌុលត្រួតពិនិត្យក្រាហ្វិក FORENEX FES4335U1, you can use the serial interface (UART-TTL) provided by the module. You will need an external MCU (such as 8051) to communicate with the module. The module offers a UART interface with a baud rate of 115200/N/8/1. By transmitting the corresponding command code with parameters to the module over the serial interface, the command decoder inside the module will automatically implement the graphics task. You can refer to the "Commands Table" in the manual for graphical effect calling and execution.
បន្ថែមមតិយោបល់ថ្មី។