សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 30 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 11:50 ព្រឹក
To adjust the differential temperature setting on the ឧបករណ៍បញ្ជា INTIEL DT 3.1 ទែម៉ូស្តាតឌីផេរ៉ង់ស្យែលដែលអាចសរសេរកម្មវិធីបាន។អនុវត្តតាមជំហានទាំងនេះ៖
1. Press the "▄" button to access the settings menu. An icon will light up on the display.
2. Use the "▲" and "▼" buttons to select the parameter you want to adjust, in this case, "dt" which represents the temperature difference between the solar panels and the boiler (∆T).
3. Press the "▄" button to enter the parameter setting mode. The value will start flashing.
4. Use the "▲" and "▼" buttons to change the value of the temperature difference setting (∆T) between 2 and 20 °C.
5. Once you have set the desired temperature difference, press the "▄" button to confirm and save the changes.
6. To exit the settings menu, select "End Set" and press the "▄" button.
By following these steps, you can easily adjust the temperature difference setting on your ឧបករណ៍បញ្ជា INTIEL DT 3.1 ទែម៉ូស្តាតឌីផេរ៉ង់ស្យែលដែលអាចសរសេរកម្មវិធីបាន។ to suit your specific needs and preferences.
បន្ថែមមតិយោបល់ថ្មី។