សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 11:16 ព្រឹក
To change the saw blade on your BOSCH PKS 18 Li 150mm 18V 1 x 2.0Ah Li-Ion Power Cordless Circular Saw, follow these step-by-step instructions as per the user manual:
**Removing the saw blade:**
1. Remove the battery from the power tool before starting any work.
2. Wear protective gloves for safety.
3. Press and hold the spindle lock button located on the power tool.
4. Use the hex key to undo the clamping bolt in the rotational direction.
5. Swing the retracting blade guard back and hold it firmly.
6. ដក clamping flange and the saw blade from the saw spindle.
**Fitting the new saw blade:**
1. Clean the saw blade and all clampធាតុដែលត្រូវបំពាក់។
2. Swing the retracting blade guard back and hold it firmly.
3. Place the new saw blade on the mounting flange. Ensure the cutting direction of the teeth matches the rotational direction indicated on the protective guard.
4. ភ្ជាប់ clamping flange and xxxx in the clamping bolt in the rotational direction. Make sure the mounting flange and clamping flange are installed correctly.
5. Press and hold the spindle lock button.
6. ប្រើគ្រាប់ចុចគោលដប់ប្រាំមួយដើម្បីរឹតបន្តឹង clamping bolt. The tightening torque should be 6-9 Nm, which is hand-tight plus a ¼ turn.
Remember to always follow safety precautions, such as removing the battery before working on the saw blade, wearing protective gloves, and ensuring the power tool is switched off. If you have any doubts or difficulties, refer to the សៀវភៅណែនាំអ្នកប្រើប្រាស់ សម្រាប់ការណែនាំលម្អិត និងដ្យាក្រាម។
បន្ថែមមតិយោបល់ថ្មី។