សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:11 ព្រឹក
To simulate the Triple-Speed Ethernet Intel FPGA IP design exampនៅលើ testbench using different simulators, you can follow these steps as outlined in the user guide:
1. **ModelSim:**
- Change to the testbench simulation directory `/example_testbench`.
- Run the simulation script for ModelSim by typing `vsim -do run_vsim_mac_pcs.do` in the command line. If you prefer to simulate without bringing up the ModelSim GUI, type `vsim -c -do run_vsim_mac_pcs.do`.
2. **Synopsys VCS/VCS MX:**
- Change to the testbench simulation directory `/example_testbench`.
- Run the simulation script for VCS/VCS MX by typing `sh run_vcs_mac_pcs.sh` or `sh run_vcsmx_mac_pcs.sh` in the command line.
3. **Xcelium:**
- Change to the testbench simulation directory `/example_testbench`.
- Run the simulation script for Xcelium by typing `sh run_xcelium_mac_pcs.sh` in the command line.
After running the respective simulation script for the supported simulator of your choice, the កៅអីសាកល្បង will compile and run in the simulator. You can then analyze the results to verify the functionality of the Triple-Speed Ethernet Intel FPGA IP design exampនៅលើ testbench ។
បន្ថែមមតិយោបល់ថ្មី។