សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 29 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 09:19 ព្រឹក
To change the input names and messages for the GiSMo-G mini GSM-GPRS Programmable Communicator, follow these steps based on the provided manual instructions:
1. **Change Input Names:**
- To change the names of Inputs 1-4, send the following SMS commands:
- For Input 1: *2222 INPUT1 [NEW_NAME]
- For Input 2: *2222 INPUT2 [NEW_NAME]
- For Input 3: *2222 INPUT3 [NEW_NAME]
- For Input 4: *2222 INPUT4 [NEW_NAME]
- Replace [NEW_NAME] with the desired name for each input, up to 16 characters in length.
2. **Change Input High Messages:**
- To change the HIGH messages for Inputs 1-4, send the following SMS commands:
- For Input 1: *2222 HIGH1 [NEW_MESSAGE]
- For Input 2: *2222 HIGH2 [NEW_MESSAGE]
- For Input 3: *2222 HIGH3 [NEW_MESSAGE]
- For Input 4: *2222 HIGH4 [NEW_MESSAGE]
- Replace [NEW_MESSAGE] with the desired message for each input when triggered, up to 8 characters in length.
3. **Change Input Low Messages:**
- To change the LOW messages for Inputs 1-4, send the following ពាក្យបញ្ជា SMS:
- For Input 1: *2222 LOW1 [NEW_MESSAGE]
- For Input 2: *2222 LOW2 [NEW_MESSAGE]
- For Input 3: *2222 LOW3 [NEW_MESSAGE]
- For Input 4: *2222 LOW4 [NEW_MESSAGE]
- Replace [NEW_MESSAGE] with the desired message for each input when restored, up to 8 characters in length.
4. **ចំណាំ៖**
- Use an underscore (_) as a space in the input names and messages.
- Ensure all commands are sent in UPPERCASE.
- The customization allows for better identification and understanding of the input statuses on the GiSMo-G mini GSM-GPRS Programmable Communicator.
By following these steps, users can easily customize the input names and messages on the GiSMo-G mini GSM-GPRS Programmable Communicator to suit their specific monitoring needs.
បន្ថែមមតិយោបល់ថ្មី។