សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:59 យប់
ដើម្បីកំណត់រចនាសម្ព័ន្ធ LightCloud Luminaire Controller for your lighting system, follow these steps based on the provided user manual:
1. ** ការដំឡើង៖ **
- Turn off the power before starting the installation process.
- Find a suitable location for the Luminaire Controller based on the wireless range guidelines provided in the manual.
- Install the Luminaire Controller either inside the luminaire housing or in a junction box, ensuring proper placement of the actuator and radio modules.
2. **Connecting to LightCloud Gateway:**
- Ensure you have a LightCloud Gateway to manage your devices.
- Use the LightCloud Installer Application available for iOS and Android to scan and assign each device to a room.
- Submit the device information for commissioning after adding and organizing all devices.
3. ** ការកំណត់រចនាសម្ព័ន្ធ៖ **
- All configuration of LightCloud products can be done using the LightCloud web Application or by contacting RAB.
- Power measurement feature can be utilized by connecting the neutral wire of the load to the white-red neutral wire.
- Power loss detection and emergency default settings are available to ensure proper functionality during power interruptions.
4. **FCC Information:**
- The device complies with FCC rules and regulations, ensuring minimal interference and safe operation.
- Follow the guidelines provided in the manual to address any interference issues that may arise.
By following these steps and guidelines from the user manual, you can effectively set up and configure the LightCloud Luminaire Controller for your lighting system. For further assistance or troubleshooting, you can contact RAB Lighting at the provided support contact information.
បន្ថែមមតិយោបល់ថ្មី។