សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:38 យប់
ដើម្បីធានាថា ស ធ្នើ is properly leveled during assembly, follow these steps:
1. Check that the beams or braces used for the same level are at the same height and are not assembled upside down.
2. Make sure that the rivets on the beams or braces are fully seated into the post slots. If not, reassemble the beams or braces and fully seat the rivets.
3. Ensure that the unit is placed on a flat, level, and hard surface. If the ground is uneven or too soft, it can cause the shelf to be unlevel.
4. If the shelf is still not level after checking the above points, reassemble the beams or braces and make sure they are properly aligned and seated.
By following these steps and ensuring that the assembly is done correctly, you can prevent issues with the ធ្នើ not being level and ensure the stability and safety of the storage shelving unit.
បន្ថែមមតិយោបល់ថ្មី។