សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:41 យប់
នេះបើយោងតាមសៀវភៅណែនាំសម្រាប់គ កម្មវិធីតាមដាន HoopoSense 502G1000-1A, here is how you can ensure proper battery installation and verify activation:
1. **Battery Installation Verification:**
- After installing the batteries, listen for the tracker to beep three times approximately 1-2 seconds after installation. This indicates that the batteries have been properly inserted.
2. **Activation Verification:**
- Within 1-2 minutes of battery installation, the tracker should report to the hoopoDashboard. Note that the first activation may take up to 4 minutes.
- To verify activation, search for the hoopoSense tracker serial number (labeled as BCCDXXXX on the tracker sticker) and check that the time displayed in the "Last Report" field on the hoopoDashboard matches the actual activation time.
- Keep in mind that other data fields may show inaccurate information until the tracker has been properly utilized for the first time.
By following these steps, you can ensure that the batteries are correctly installed and verify the activation of your កម្មវិធីតាមដាន HoopoSense.
បន្ថែមមតិយោបល់ថ្មី។