សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 28 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 11:36 ព្រឹក
កំឡុងពេលដំឡើង EO Mini Pro 3, connecting it to your Wi-Fi network is crucial for its proper functioning. Here are the steps to connect the charger to your Wi-Fi network as per the installation guide:
1. **Verify Wi-Fi Signal Strength:**
- Use a Wi-Fi analyzer mobile app to check the stability, strength, and interference levels of your Wi-Fi signal.
- Ensure the RSSI signal to your Wi-Fi router is no greater than -60dB for optimal performance.
2. **Connecting to Wi-Fi:**
- If the Wi-Fi signal is suitable, connect the EO Mini Pro 3 to your Wi-Fi network by following these steps:
- Power up the charger and locate the installer "Access Label."
- Use your mobile device to connect to the charger's hotspot using the credentials provided on the "Access Label."
- Open your device's web browser ហើយបញ្ចូល 10.10.10.1 ក្នុងរបារអាសយដ្ឋាន។
- You will be directed to the charger's User Interface (UI) login page.
- Enter the UI credentials found on the "Installer Access Label" to access the charger's settings.
3. **Smart Charging Configuration:**
- By default, the charger is set up for smart charging, which can be overridden by the homeowner using the EO Charging app.
- If you wish to adjust the smart charging settings, consult the homeowner to ensure the charger operates as expected.
4. **Randomized Delay Setting:**
- The charger offers a random delay feature to manage charging sessions. The default setting is 10 minutes, but this can be adjusted by the homeowner through the charger's UI.
5. **ជំហានចុងក្រោយ៖**
- Once connected to Wi-Fi and configured, complete the installation process by securing all connections and closing the charger case.
- Ensure all cables are securely connected and the charger is mounted properly before attaching the fascia.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកអាចភ្ជាប់របស់អ្នកដោយជោគជ័យ EO Mini Pro 3 to your Wi-Fi network during installation for efficient operation and monitoring.
បន្ថែមមតិយោបល់ថ្មី។