សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 27 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 05:47 យប់
នេះ។ HLG-100H LED driver allows for adjustment of the output voltage and current through built-in potentiometers. Here's how you can adjust them:
1. ** វ៉ុលtage Adjustment:**
- វ៉ុលtage adjustment range varies depending on the model type (A/AB-Type).
- Use a screwdriver to turn the potentiometer within the specified voltage range for your model.
- Adjust the voltage within the recommended range to achieve the desired output for your LED lighting system.
2. **Current Adjustment:**
- Similar to voltage adjustment, the current adjustment range also varies based on the model type (A/AB-Type).
- Use a screwdriver to turn the potentiometer within the specified current range for your model.
- Adjust the current within the recommended range to meet the requirements of your LED lighting setup.
**Note:** It is important to refer to the specific voltage and current adjustment ranges provided in the manual for each model variant of the ស៊េរី HLG-100H to ensure proper operation and optimal performance of your LED lighting system.
បន្ថែមមតិយោបល់ថ្មី។