សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 04:57 យប់
To connect your Revolution 2x2 Portable Recording Interface to your computer for playback and recording, follow these steps:
1. **Windows Users:** Install the Revolution 2X2 Windows ASIO driver by following the onscreen instructions provided in the installer. Once the installation is complete, you will be prompted to reboot your computer. Click "Finish" to restart your computer.
2. **MacOS Users:** The Revolution 2X2 is a class-compliant Core Audio device, so no installation is necessary. Simply connect your Revolution 2X2 to your computer to begin using it.
3. **Prepping for Playback:** Turn the Mixer xxxx on the front panel of your Revolution 2X2 to the 12 o'clock position to hear both your inputs and playback from the computer. Connect headphones to the headphone output and adjust the volume control to the 12 o'clock position.
4. **Recording:** Connect a microphone to the XLR-Combo input, adjust the preamp gain xxxx , engage the MONO button for input monitor summing, and click the "Record" button in your recording software to start recording.
5. **Panel Overview:** The front panel features XLR-Combo inputs, preamp gain xxxx , input meter, 48V phantom power button, input select button, main output meter, monitor xxxx , USB status LED, direct mixer xxxx , headphone volume control, headphone output, and mono button for input monitoring.
6. **Rear Panel:** Connect your monitors to the main output, S/PDIF digital outputs to the S/PDIF input, and another device to the S/PDIF output. Use the USB-C connector to connect your computer to the interface.
ដោយអនុវត្តតាមជំហានទាំងនេះ និងយោងទៅ ការណែនាំអ្នកប្រើប្រាស់ for further details, you can successfully connect and use your Revolution 2x2 Portable Recording Interface with your computer for playback and recording purposes.
បន្ថែមមតិយោបល់ថ្មី។