សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 04:17 យប់
ដើម្បីកំណត់រចនាសម្ព័ន្ធ AlertWerks 4-20mAmp ឧបករណ៍បំលែងសញ្ញា for use with your sensors, follow these steps based on the information provided in the user manual:
1. **Plug the sensor into one of the RJ-45 ports on the gateway.**
2. **Access the unit's IP address (default: 192.168.0.100) via a web browser and log in as the administrator (default password: public).**
3. **Navigate to the sensor's tab on the summary page to set up sensor thresholds.**
4. **Configure the following key settings specific to your sensor:**
- ** ការអានបច្ចុប្បន្ន៖ ** បង្ហាញភាគរយtage ឬតម្លៃដាច់ខាតនៃ 4-20 ម។Amp Converter. This value can be polled via SNMP for graphing purposes.
- **Status:** Compares the current reading to user-set thresholds and triggers alerts if necessary.
- **Thresholds (Critical High, Warning High, Warning Low, Critical Low):** Set these thresholds based on your sensor's specifications.
- **Display Units:** Enter the appropriate unit for the measured entity (e.g., Pounds, mA).
- **Type of Scale:** Choose between displaying the current reading as an absolute or percentage តម្លៃ។
- **Max Scale of Sensor in mA:** Enter the maximum input value (usually 20 mA).
- **Base Scale of Sensor in mA:** Enter the minimum input value (usually 4 mA).
- **How Many Percent/Unit (Max Scale):** Set to the maximum absolute value or 100% for percentagមាត្រដ្ឋាន។
- **How Many Percent/Unit (Base Scale):** Set to the minimum absolute value or 0% for percentagមាត្រដ្ឋាន។
5. ** ឧample Configuration (Pressure Sensor):**
- **Display Unit:** "Lbs"
- **Type of Scale:** "Absolute"
- **Max Scale of Sensor in mA:** 20.0
- **Base Scale of Sensor in mA:** 4.0
- **How Many Lbs at 20.0 mAmp:** 300.0
- **How Many Lbs at 4.0 mAmp:** 50.0
6. **Calibrate the converter as needed for accurate readings.**
By following these steps and configuring the key settings and values according to your sensor's specifications, you can effectively set up and utilize the AlertWerks 4-20mAmp ឧបករណ៍បំលែងសញ្ញា with your sensors.
បន្ថែមមតិយោបល់ថ្មី។