សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:31 យប់
To properly install and power the HM7000-Next 21TXS ម៉ូឌុលប៊្លូធូស in your toy track car, follow these guidelines as per the user manual:
1. **Power Supply Range:** The HM7000-21TXS Module requires a power supply range of DC 14V~16V. Ensure that the power supply you use for the module does not exceed this range.
2. **Correct Pin Installation:** Make sure that the module pins are correctly installed into your toy track car.
3. **Module Modifications:** Do not allow users to replace or dismantle the module. Any modifications to the HM7000-Next 21TXS model may invalidate regulatory approvals or require notifications to relevant regulatory authorities.
4. **Antennas:** The module comes with a PCB antenna. Ensure that the antenna is properly integrated into your toy track car.
5. **Compliance:** The HM7000-Next 21TXS module is limited to Hornby Corporation use ONLY. It should not be co-located or operate simultaneously with other antennas or transmitters.
6. **Testing Requirements:** When testing your host product with the module installed, follow the FCC KDB Publication 996369 D04 Module Integration Guide for testing procedures. If the pairing and call box options for testing do not work, coordinate with the module manufacturer for access to test mode software.
By following these installation guidelines and ensuring compliance with the specified operational use conditions, you can effectively install and power the HM7000-Next 21TXS ម៉ូឌុលប៊្លូធូស in your toy track car.
បន្ថែមមតិយោបល់ថ្មី។