សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:10 យប់
ដើម្បីផ្គូផ្គង OneSync fixture to the remote control, follow these steps as per the user manual:
1. **Entering Pairing Mode:**
- Hold down the pairing button on your OneSync fixture for 3 seconds until it starts blinking slowly, indicating it is in pairing mode. The fixture will remain in pairing mode for three minutes.
2. **Pairing the Remote to the Fixture:**
- While the fixture is in pairing mode, press and hold the desired Groups button (1, 2, 3, 4, 5, or 6) on the remote for 3 seconds to pair the remote to the selected group. The light will flash once, and the fixture will exit pairing mode.
3. **Unpairing the Remote from the Fixture:**
- To unpair, follow step 1 to ensure the fixture is in pairing mode. Then, on the remote, press the pairing group button and hold the power button for 3 seconds. The light will flash once, and the fixture will exit pairing mode.
- To unpair from all groups at once, hold down a button on the OneSync device for 10 seconds. It will flash three times rapidly to indicate that all groups have been unpaired from the fixture.
4. **Note:** The remote comes with a universal Group #1 pre-paired to all fixtures. To create unique groups, pair using Groups #2-6. All fixtures are pre-paired to the universal Group #1. To deactivate this universal group, follow the unpairing instructions in Step 3.
ដោយធ្វើតាមជំហានទាំងនេះ អ្នកអាចផ្គូផ្គងរបស់អ្នកយ៉ាងងាយស្រួល OneSync fixture to the remote control for convenient and customized control of your lighting fixtures.
បន្ថែមមតិយោបល់ថ្មី។