សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 11:02 ព្រឹក
ដើម្បីរៀបចំ Eurolite Derby Z-4000 LED Light Effect for DMX operation, follow these steps as per the user manual:
1. **Setting DMX Mode and Address:**
- Press the MENU button until "Addr" is displayed.
- Use the UP and DOWN buttons to select either 5-channel mode (5CH) or 12-channel mode (12CH).
- Set the DMX starting address by adjusting the value displayed (d***).
2. **Functions in DMX Mode:**
- In 5-channel mode, channels control motor rotation, master dimmer, strobe, preset colors, and auto/sound control.
- In 12-channel mode, additional channels are available for more control over the device's functions.
3. **DMX Control:**
- Connect your DMX controller to the device using a DMX cable.
- Connect the DMX output of the last unit in the chain to a terminator with a 120 Ω resistor.
- Ensure proper data transmission by using a DMX level amplifier for long cable lengths or multiple devices.
By following these steps, you can successfully set up and operate the Eurolite Derby Z-4000 LED Light Effect in DMX mode for precise control and lighting effects.
For more detailed instructions and technical specifications, refer to the complete user manual provided by Eurolite.
បន្ថែមមតិយោបល់ថ្មី។