សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 10:38 ព្រឹក
ដើម្បីភ្ជាប់ COB strip to the controller and driverអនុវត្តតាមជំហានទាំងនេះ៖
1. Unroll the LED strip and check if all components are complete and in good condition.
2. Connect the COB strip to the controller and driver based on the wiring diagram provided in the user manual.
3. Clean the installation surface to ensure it is clean, dry, and smooth. This will help maintain the adhesiveness of the back tape on the strip.
4. Measure the required length on the surface and cut the COB strip accordingly.
5. Peel off the back tape and carefully paste the strip onto the surface, ensuring it is smooth and correctly aligned.
6. Make sure to fix the driver securely to prevent any components from falling off.
By following these steps and referring to the wiring diagram in the សៀវភៅណែនាំអ្នកប្រើប្រាស់, you can successfully connect the COB strip to the controller and driver for proper functioning of the LED strip light.
បន្ថែមមតិយោបល់ថ្មី។