សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 26 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 09:44 ព្រឹក
To properly insert and remove the bit on the Einhell CC-IW 950-1 កម្មវិធីបញ្ជាផលប៉ះពាល់អគ្គិសនីសូមអនុវត្តតាមជំហានទាំងនេះ តាមសៀវភៅណែនាំ៖
**Bit insertion/removal:**
1. Push a drive socket insert onto the square drive mount.
2. To remove it, pull the drive socket insert off of the square drive mount.
It is important to ensure that the bit is securely inserted onto the square drive mount before using the impact driver for any tasks. Properly inserting and removing the bit will help maintain the tool's functionality and prevent any accidents during operation.
បន្ថែមមតិយោបល់ថ្មី។