សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 05:10 យប់
1. **Safety First:** Before starting the installation process, ensure that the pool meets the requirements of the current National Electrical Code (NEC) and all local codes and ordinances. It is crucial to have a licensed or certified electrician install the electrical system to meet or exceed these requirements.
2. **Preparing the Niche:** Notch the bond beam as shown in the សៀវភៅដៃ and attach a level board to the side of the pool to set the level of the waterfall and create a form for the mortar bed.
3. **Setting the Waterfall:** Create a mortar bed in the notch in the bond beam and press the waterfall unit into the mortar until the bottom of the lip is flush with the board. Ensure the lip support is pressed into the slot to prevent debris from entering the waterfall.
4. **Connecting Water Supply:** Install a 1-1/2 inch PVC water line for water supply and a 1-inch electrical conduit for the light cable. Ensure the water line is equipped with an adjustable control valve to adjust water flow.
5. **Finishing Touches:** After the mortar bed is cured, remove the board and add filler if needed to level out the waterfall. Remove the lip protector support and ensure the waterfall is installed level for even water flow.
6. **Installing the LED Light Assembly:** Feed the cord through the waterfall and conduit to the junction box or 12 Volt AC transformer. Connect the wires to the corresponding circuit wires (black to power, white to common) and test the LED light before locking it into the niche.
7. **Final Steps:** Apply O-ring lubricant to the light and socket, use the installation tool to lock the light into place, and secure the deck cover collar with PVC cement and silicone adhesive.
8. **Testing:** Switch on the main switch or circuit breaker to the transformer and the light switch to illuminate the LED light. Ensure the light functions properly before completing the installation.
By following these steps outlined in the manual, you can safely and effectively install the PENTAIR MagicFalls ជាមួយអំពូល LED បច្ចេកវិទ្យា LightCascade in your pool.
បន្ថែមមតិយោបល់ថ្មី។