សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 03:54 យប់
To ensure that your device is fast charging properly with the ឆ្នាំងសាករថយន្ត ACEFAST B5 Fast Chargeអនុវត្តតាមជំហានទាំងនេះ៖
1. **Check the Charging Cable:** Make sure you are using a charging cable that meets the fast-charging protocol to enable the fast-charging function. Using a standard cable may not support fast charging.
2. **Monitor the OLED Display:** When your device is connected to the charger, the OLED display will show "ACEFAST" in the cigarette lighter slot. When charging, the display will show real-time parameters such as charging voltage, current, and power for each port (C1, C2, A1).
3. **Observe Charging Behavior:** If your device supports fast charging, you should notice a significant increase in charging speed compared to a regular charger. The charger will automatically adjust the output based on your device's requirements.
4. **Disconnect After Full Charge:** To protect your device, disconnect it from the charger once it is fully charged. Overcharging can damage your device's battery over time.
5. **Avoid Simultaneous Fast Charging:** Note that using both USB-C1 and USB-A1 ports simultaneously may not support fast charging. It's recommended to use one port at a time for optimal performance.
By following these guidelines and monitoring the charging process through the OLED display, you can ensure that your device is fast charging properly with the ឆ្នាំងសាករថយន្ត ACEFAST B5 Fast Charge.
បន្ថែមមតិយោបល់ថ្មី។