សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:58 យប់
To adjust the brightness and select different light effects on the អំពូលវីដេអូ LED Godox VL200IIសូមអនុវត្តតាមជំហានទាំងនេះ ដូចដែលបានរៀបរាប់នៅក្នុងសៀវភៅណែនាំ៖
1. ** បើក/បិទ៖ **
- Connect the adapter and controller, then long press the Power Switch to turn the LED light on or off.
2. **Mode Selection: Constant On Mode/FX Mode:**
- **Constant On Mode:** The main interface is constant on mode. Turn the adjust dial to change the brightness from 0% to 100%.
- **FX Mode:** Long press the FX/Wireless button to enter FX mode. Turn the adjust dial to select among the 8 light effects. Short press the FX/Wireless button to confirm the selection.
3. **Light Effects Table (8 Types):**
- FX1: Flash 1
- FX2: Flash 2
- FX3: Flash
- FX4: Storm 1
- FX5: Storm 2
- FX6: Storm 3
- FX7: Broken bulb
- FX8: TV
4. **2.4GHz Wireless Setting:**
- Short press the FX/Wireless button to set the channel (CH) and group (GR). Follow the on-screen instructions to choose the desired settings.
5. **Power Option (VL300II):**
- Press the power switch and FX/Wireless button simultaneously in power-off status to enter power option mode. Adjust the power output by turning the adjust dial.
6. **Bluetooth Control:**
- Check Bluetooth MAC code: Short press the FX/Wireless button four times to display the Bluetooth icon and MAC code.
- Bluetooth Reset: Long press the FX/Wireless button in Bluetooth setting interface to reset Bluetooth.
7. **APP Download:**
- Scan the QR code in the manual to download the "ពន្លឺ Godox" mobile app for additional control options.
By following these steps, you can adjust the brightness, select different light effects, and utilize the wireless control features of the Godox VL200II LED Video Light.
បន្ថែមមតិយោបល់ថ្មី។