សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 02:12 យប់
ដើម្បីរៀបចំ HEVAC Endeavour ឧបករណ៍បញ្ជាសីតុណ្ហភាពដែលអាចសរសេរកម្មវិធីបាន។ for a basic heating and cooling system with a single heating stage and a single cooling stage អនុវត្តតាមជំហានទាំងនេះ៖
1. Press the "ENTER" button on the controller to access the menu.
2. Scroll down to "PRESET PROGRAMS" using the "DOWN" button and press "ENTER" to open the menu.
3. Select "PROGRAM # 1 1H / 1C 1 HEAT / 1 COOL" from the list of preset programs by scrolling with the arrow buttons and pressing "ENTER" to load this program into the controller's memory.
4. The controller will automatically set the relay configurations for a single heating stage and a single cooling stage based on this program.
5. Ensure that the settings for the heating and cooling stages មានដូចខាងក្រោម៖
- Heating Stage: Mode - HEAT, Deadband - 1.0, Switch Differential - 0.3, Time Delay - 1 Min.
- Cooling Stage: Mode - COOL, Deadband - 1.0, Switch Differential - 0.3, Time Delay - 1 Min.
6. The controller is now configured for a basic heating and cooling system with one heating stage and one cooling stage.
By following these steps and selecting the appropriate preset program, you can easily set up the HEVAC Endeavour ឧបករណ៍បញ្ជាសីតុណ្ហភាពដែលអាចសរសេរកម្មវិធីបាន។ for a simple heating and cooling application in your home.
បន្ថែមមតិយោបល់ថ្មី។