សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 01:04 យប់
To check if the surge protection feature is working properly on the CyberPower HT200W 2-Outlet Surge Protector, look for the "Surge Protected Indicator" on the device. The indicator will be illuminated when the surge protection feature is operational and providing protection to your connected devices.
If the "Protected" indicator does not light up, it indicates that the surge protector's AC lines are no longer protected from surges. In this case, it is recommended to replace the surge protector. The lack of illumination could mean that the protection circuitry has been overloaded due to a power surge or spike beyond the specified limits, rendering it inactive.
Remember that while the surge protector may have safeguarded your connected equipment during the previous event, it will not be able to protect against future surges and spikes if the indicator is not lit. Regularly checking the surge protection indicator is a good practice to ensure the ongoing safety of your devices.
បន្ថែមមតិយោបល់ថ្មី។