សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 25 ខែកញ្ញា ឆ្នាំ 2025 - ម៉ោង 12:33 យប់
To switch between point-to-point mode and streaming mode on the ប្រព័ន្ធបញ្ជូនឥតខ្សែ CVW Thunder 2-Channelអនុវត្តតាមជំហានទាំងនេះ៖
1. **Switching to Point-to-Point Mode:**
- Connect the video source to the transmitter via HDMI or SDI.
- The receiver will receive the signal and display it on the display device via HDMI and SDI.
2. **Switching to Streaming Mode:**
- Connect the video source to the transmitter via HDMI or SDI.
- The receiver will receive the RTSP protocol network signal from the transmitter.
- Send the signal to the computer for display through the network port.
- Connect to the WiFi at the receiver using your mobile phone or tablet.
- Watch the stream through the player on your mobile device.
By following these steps, you can easily switch between point-to-point mode and streaming mode on the ប្រព័ន្ធបញ្ជូនឥតខ្សែ CVW Thunder 2-Channel.
បន្ថែមមតិយោបល់ថ្មី។